If I replace the whole overdrive unit should I replace the overdrive piston too or would it be ok to reuse it ?
If I replace the whole overdrive unit should I replace the overdrive piston too or would it be ok to reuse it ?
Personally I would try to make sure the PCM is even commanding overdrive and that you are getting voltage send to the od solenoid before you tear into the trans.
99 R/T RC IB
Megasquirt II
53%
The eternal realist, If you don't like what I have to say put me on your ignore list
BLACK '02 RC R/T (BLACK N BITTER) 12.5 @ 109 mph. Under the knife again.
'99 IB RC R/T (Sabrina's truck) 13.8 @ 96 mph SOLD!
'10 B5 blue pearl Challenger R/T Classic edition. Totaled!!! FML!!!
'98 CC R/T Bought wrecked. Restoring it.
'05 WRANGLER (DD)
'05 HARLEY FXDCI
Your problem isn't the problem. Your reaction is the problem.
Is there a video somewhere that would show me how this is done ?
Get a scanner and see if pcm is commanding od, if it is you probably have a blown lip seal on the piston.
P0505
Idle control system malfunction
P0783
3-4 shift malfunction
P0740
TCC Circuit malfunction
I already changed all sensors and selonoids in transmission
hade the p0740 on a ram -97 couldnt find anything in the transmission ,but i put in Another converter when i have the transmission down ,every band/frictions looks good to i i put in some new seals in direkt and od pistons at the same time now it runs good
mabey a internal leak?
Dodge dakota R/T -99 CC intense Blue procharger
Dodge Ram 1500 -96 5.2 2wd
Dodge Dart GT -69 bigblock Racecar
Jeep Grand Cherokee CRD
https://www.youtube.com/user/Tobbe446
http://www.facebook.com/pages/TA-Racing/270995856350156
I'm picking up another trans this weekend hopefully. If everything works out good with that trans, I'll be selling or trading this one