1 1/16" total width?
2000 CC
11.37@122
Yeah you're right so is it 1 1/16? Looks like it to me?
2000 CC
11.37@122
Yeah but a 1/16th of an inch you wont be able to tell in the body lines... its still dodge fit/finish haha
But it will get you in the ballpark and certainly get the body lines to line up pretty close. I would install the bushings as is and see how they fit first then if you have the same misalignment like the other pics take them to the height I showed in the picture.
And this is ONLY for the TOP bushing on the REAR mounts, the bottom ones do not need to be modified nor do the fronts. And dont forget the inside taper needs to be modified once they get machined shorter.
HI. I like beer, burnouts, and boobies...
Was there any settling after you installed them? Seems pretty straight forward Fuck it why am I even asking you when I can ask Cropp......He knows all
2000 CC
11.37@122
Years ago I did the poly frame and suspension bushings on a daily driver, won't make that mistake again.
"Excuse me if I have some place in my mind, where I go time to time"
Poly suspension bushings are one of the best mods I've done on both trucks. Can't speak to the body bushings, but I could see where they might increase vibrations and ride harshness inside the cabin. Poly steering rack bushings are a another must due mod, and sometimes get overlooked
"the vast majority of the people on this website are such tight asses that they could probably squeeze out diamonds - but they'd never spend the money to buy the coal' - Steve F. 2012
"Don't be obsessed with your desires Danny. The Zen philosopher Basho once wrote, "A flute with no holes is not a flute, and a doughnut with no hole is a Danish" - Ty Webb, 1980
"the vast majority of the people on this website are such tight asses that they could probably squeeze out diamonds - but they'd never spend the money to buy the coal' - Steve F. 2012
"Don't be obsessed with your desires Danny. The Zen philosopher Basho once wrote, "A flute with no holes is not a flute, and a doughnut with no hole is a Danish" - Ty Webb, 1980
I don't know if it was the body mounts or something else but I got terrible resonance in the cab. With solid motor mounts and solid front eye leaf spring bushings I think the poly body mounts transmitted a lot of vibrations. If you ever bang on the back cab wall you will notice that it's sounds like a drum. I'm going back to rubber front eye leaf bushings and cab mounts. I'm hoping this will eliminate a lot of in cab noise.