I've got an 03 reg cab r/t with a 275/50 17 tire that I'm wanting to lower 2/3, I'm leaning towards wc a arms in front but not sure what to do on the rear, I want to try to stay away from blocks so I was thinking wc front and rear hanger kit but have heard some people say they don't fit the best. Opinions?
+ Reply to Thread
Results 1 to 5 of 5
Thread: Lowering question
-
11-23-2014, 05:46 PM #1Senior Member
Status- Offline
Join Date- Feb 2010
Location- Ponca City, OK
Posts- 205
Lowering question
2012 Express
Mcgaughy's 2/4On the hunt for another
-
11-23-2014, 05:57 PM #2Senior Member
Status- Offline
Join Date- Feb 2014
Location- Mary Esther, Florida
Posts- 1,224
Hanger kit ftw
Mostly stock:
Open air Cleaner
52mm TB
No cat, flowmaster
Way more mods to come
-
11-23-2014, 07:36 PM #3Senior Member
Status- Offline
Join Date- Feb 2010
Location- Ponca City, OK
Posts- 205
Did you do front and rear hangers? How was the front hanger with the gas tank?
Originally Posted by 97dakota318
2012 ExpressMcgaughy's 2/4On the hunt for another
-
11-23-2014, 07:52 PM #4
Senior Member
Status- Offline
Join Date- Jan 2014
Location- Texas
Posts- 182
Front hanger is not that hard. Loosen the gas tank and you can move it over enough to get a tool in there. I used a torch to cut the rivets off then put the bolts through with the nuts on the inside of the rail.
-
11-23-2014, 08:28 PM #5
Enough Show, Need More Go
Status- Offline
Join Date- Jul 2013
Location- Langton, Ontario Canada
Posts- 1,106
I've heard the wc hangers kits drop 1-2" more then advertised. That true?
1998 Silver RC SLT - Hughes 2.02 Heads, Mopar M1 4bbl Intake, Mopar 4bbl TB, 230/236 .515/.515 on a 110, 1.6 Roller Rockers, MSD Coil,4.10's, Spintech Headers, 3" Duals, X Pipe, Chambered Mufflers, 4/4 Drop, 727 Full Manual w/Transbrake, PTC 4500 Stall
12.90 at 104mph
Reply With Quote
