Nasty man! Im jealous
650ish lift. 250ish duration
Suddenly becomes
One more slick question...Hoosier or MT? Reason why I'm asking is Hoosier only comes a C07 at that size, 10.5 (firmer than D06), MT's come either way stiff wall or normal wall, but I understand they don't hold air so you have to run Tubes which makes their stiff wall stupid stiff.
11.27 @ 118.232017 NM Mopar Challenge Series Champion
I read somewhere using dish soap on the inside of the M/T's (ET Streets bias) and massaging it in on the inside would stop that leakage. Found a few more people that said same thing.
Still thinking it was a little strange I tried it on mine anyway. They lose less than a lb a month if that, and that could just be outside temp. I will be doing it to the next set as well. Running mine on street and track, no tubes. Used Dawn dish soap, 1/2 bottle per tire, rotated 90* every 5mins, sopped up the extra but did not wipe clean, just let it soak up. Set for a week and then mounted.
00 FR RC Dakota R/T Turbo 11.56@118
99 Amethyst RC Dakota R/T 1-170 13.84@98
P.I.E. tuned cause Flynn is for the Birds if you wanna Run Fast have some PIE !
Just call me George W
Chris's truck only pulled to about 6,300 rpm after that the power started to fall off a little. I pulled it to 6800 rpm. Did not see a reason to turn it higher.
Hoosier 10.5 wide. If they are still good lol
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Yeah. I might put d06 compound Hoosiers on next just for that reason.
I was talking to my bro today, I have my slicks off the ground, but they sat for 2 years. I'm gonna throw them on one day this week and light them up to see what condition they are in. And film it and post it here
Why tubes? I havnt had any trouble with slicks leaking. ( leaking bad enough that when I leave the pits it makes a difference)
11.27 @ 118.232017 NM Mopar Challenge Series Champion