Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
Ok I've gotten PM's from 5 of you so far on caltrac sets. Only 3 more and I'll get to working on actual shipping quotes. For the most part I would expect shipping within the US to be around $35. Guys on the east coast might expect to be around the $40.
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
I might be interested in a set of clatracs and rear adjustable shocks
Quote:
Originally Posted by Filthy Filbert
Nope. No engineers here. We're all just a buncha dum red neck monkeys scratching our asses and flinging poo at each other, wondering why our magnums are slow, expensive, and can't get good MPGs
So the deadline is Friday, do we have enough people to seal this deal?
60' @ 1.965 1/8 9.041 @ 76.4
M1 2bbl w BBK 52mm tb, HS 1.7s
Hemifever tune, 180 stat, clutch fan del.
Lowered 2.5/4 255/40 255/50 nt555s, full polys, hids
PPH headers with high flow cat, hooker aero chamber
Msaine built trans w/tcc mod, 2800 stall, caltracs
NGK zfr6f-11s, 14x3 filter, turnbuckle torque mount
Column mounted Glowshift trans temp gauge
Somebody could post it on dak-dur and see if anybody over there wants in.
98 Dakota R/T DA brought back to life.
I just made a posting, I'm hoping this still goes through. OP do we have a final head count for this yet?
60' @ 1.965 1/8 9.041 @ 76.4
M1 2bbl w BBK 52mm tb, HS 1.7s
Hemifever tune, 180 stat, clutch fan del.
Lowered 2.5/4 255/40 255/50 nt555s, full polys, hids
PPH headers with high flow cat, hooker aero chamber
Msaine built trans w/tcc mod, 2800 stall, caltracs
NGK zfr6f-11s, 14x3 filter, turnbuckle torque mount
Column mounted Glowshift trans temp gauge
I'm going to work on it tomorrow. Today is my wife's birthday so been tied up most of the day and going for supper and movie soon last I checked I think we need one more.
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
Has anyone heard of clearance issues on lowered trucks?. I would assume the clearance wouldn't change but would love to know.
3"drop lca, tubular uppers, qa1 coilovers on all corners, parallel 4 link with panhard, gc tank relocated to spare location between rails, walbro 255, hotchkis front sway, srt4 seats, manual sunroof, stereo, dual 3" exhaust with electric cutouts,
If you get the lowered version (has one hole in the front bracket instead of two) you shouldn't have any problems.
60' @ 1.965 1/8 9.041 @ 76.4
M1 2bbl w BBK 52mm tb, HS 1.7s
Hemifever tune, 180 stat, clutch fan del.
Lowered 2.5/4 255/40 255/50 nt555s, full polys, hids
PPH headers with high flow cat, hooker aero chamber
Msaine built trans w/tcc mod, 2800 stall, caltracs
NGK zfr6f-11s, 14x3 filter, turnbuckle torque mount
Column mounted Glowshift trans temp gauge
Add me on the list for caltracs & shims for a lowered 98 R/T. $$$ in hand. Let's make this happen!
Last edited by ScojoDak; 06-11-2014 at 10:45 PM. Reason: typo
If you haven't lived for something, you'll die for nothing.
Responding to the offer on Dak-Dur looking for additional participants to complete the group buy, I have the money, ready to buy.
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
I'm interested.....what would shipping to 55341 be?
Bruce
1998 Dakota - 5.7 Hemi - RC - 6.1 Cam, pushrods & springs, DS Predator 91 tune, LX intake manifold, aluminum fuel rails, 2006+ coils & valve covers, SST dual exhaust, Magnaflow muffler & Pypes tips, 545RFE w/ Sonnax line pressure booster, Lokar floor shifter, 9.25 diff w/ Powertrax Lock-rite locker, Dynamic Grounding system,Viper electric fan, custom aluminum fan shroud & CAI, hood nosed, tailgate and fenders shaved, Sir Michaels rollpan.
I did a last call post on dakdur, so aside from any new interest on here it should be safe to say we have our people for the gb locked in.
60' @ 1.965 1/8 9.041 @ 76.4
M1 2bbl w BBK 52mm tb, HS 1.7s
Hemifever tune, 180 stat, clutch fan del.
Lowered 2.5/4 255/40 255/50 nt555s, full polys, hids
PPH headers with high flow cat, hooker aero chamber
Msaine built trans w/tcc mod, 2800 stall, caltracs
NGK zfr6f-11s, 14x3 filter, turnbuckle torque mount
Column mounted Glowshift trans temp gauge
Ok fellas, I'm working on getting actual shipping costs so that we can get the payments sent and everyone's order placed. I should know tomorrow on the costs. I'll keep you posted.
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
Working on the actual shipping quotes. I sent a PM to a few people that I still require a bit of information from.
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
Ok I've got most all shipping quotes done. I'll be emailing a quote out to the emails provided tonight. I'll place the order Monday so that will give everyone the weekend to pay. Let me know if there is anything else. Most orders should be seen next week if I order Monday.
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
Ok I've sent out most all invoices this morning. Please review them for correct name, shipping address as well as the order and let me know of any errors and I'll make changes prior to ordering. I've already received a couple payments. Waiting on additional information from 3 others before I can invoice them. Let me know if you didn't receive an invoice and I'll resend it or else add you to the list if you weren't on it as of yesterday. I will be ordering Monday as long as all payments are in.
Thanks!
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
Got invoice ok and paid in full. Thanks
If you haven't lived for something, you'll die for nothing.
60' @ 1.965 1/8 9.041 @ 76.4
M1 2bbl w BBK 52mm tb, HS 1.7s
Hemifever tune, 180 stat, clutch fan del.
Lowered 2.5/4 255/40 255/50 nt555s, full polys, hids
PPH headers with high flow cat, hooker aero chamber
Msaine built trans w/tcc mod, 2800 stall, caltracs
NGK zfr6f-11s, 14x3 filter, turnbuckle torque mount
Column mounted Glowshift trans temp gauge