Ok so my truck is down right now, getting my tranny built by msaine currently. I'm just kinda curious what to expect from my truck in the 1/8 with my current mods.
DA would be around 250'
M1 2bbl with large turtle
180* tstat
clutch fan delete
2800 stall
built tranny
14x3 filter
autolite plugs
pph headers with Y pipe, 3" high flow cat and spintech 6000
hemifever tune
50mm tb
26" tall street tires (255/50/17 Nitto NT555s), with stock gears and wheels
If it matters or not full poly suspension, lowered 2/4 on belltech leafs and 2" blocks in the rear with belltech street perf. shocks.
No spare or winch or tools, coolant overflow/shroud and all heat shields removed
I'd take my tonneau and tailgate off for the drag strip as well. (if it would help? I know its weight off the wrong end but its still weight.)
I intend to throw it on the dyno as soon as its back together and start finally taking it to the drag strip to have some fun. Just kinda curious what I should expect, and i'll be sure to report my findings afterwards.