Page 1 of 2 1 2 LastLast
Results 1 to 25 of 43

Thread: Billet Aluminum Pulleys

  1. #1


    99blackrt's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Saskatchewan
    Posts
    874

    Default Billet Aluminum Pulleys

    Going to be finishing up the test fitting of the aluminum pulleys hopefully this weekend then I'll get some prices out for you guys. Here are some pics. Currently the crank pulley is for 97-99 style damper. Also I don't have air conditioning so I still need to find a factory pulley to go off of for those that have a/c and want a pulley. I have pictures but I need to resize them I guess as they won't attach.
    Last edited by 99blackrt; 01-11-2014 at 06:08 PM.
    Chad
    1999 Dodge Dakota R/T



    Mods
    Paxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s



    http://megaswf.com/s/2536929

  2. #2


    99blackrt's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Saskatchewan
    Posts
    874

    Default



    Chad
    1999 Dodge Dakota R/T



    Mods
    Paxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s



    http://megaswf.com/s/2536929

  3. #3

    ironsport1000's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Nov 2010
    Location
    RED HILL, PA
    Posts
    4,293

    Default

    WOW Chad! Nice!

    One small thought. I see the 3 holes for future removal of the P.S. pulley. But It might make a cleaner look to loose the holes and turn a groove in the snout for the use of the removal tool already out there. Just a thought.

    Also, and I may have missed it. Are these under drive?

    BLACK '02 RC R/T (BLACK N BITTER) 12.5 @ 109 mph. Under the knife again.
    '99 IB RC R/T (Sabrina's truck) 13.8 @ 96 mph SOLD!
    '10 B5 blue pearl Challenger R/T Classic edition. Totaled!!! FML!!!
    '98 CC R/T Bought wrecked. Restoring it.
    '05 WRANGLER (DD)
    '05 HARLEY FXDCI

  4. #4


    99blackrt's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Saskatchewan
    Posts
    874

    Default

    As for the powersteering pulley I find that the end of the pulley always gets a bit scored up from the puller if you need to remove and reinstall it. I'm going to be putting small stainless recessed like a set screw to fill the holes. This is an under kit as well. I can't remember what pulleys I had changed the sizes on as I had written the measurement out quite a while ago. I need to double check but iirc its just the crank and alternator. Pretty sure other pulleys are stock size.
    Chad
    1999 Dodge Dakota R/T



    Mods
    Paxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s



    http://megaswf.com/s/2536929

  5. #5

    ironsport1000's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Nov 2010
    Location
    RED HILL, PA
    Posts
    4,293

    Default

    Thanks Chad!

    BLACK '02 RC R/T (BLACK N BITTER) 12.5 @ 109 mph. Under the knife again.
    '99 IB RC R/T (Sabrina's truck) 13.8 @ 96 mph SOLD!
    '10 B5 blue pearl Challenger R/T Classic edition. Totaled!!! FML!!!
    '98 CC R/T Bought wrecked. Restoring it.
    '05 WRANGLER (DD)
    '05 HARLEY FXDCI

  6. #6

    Default

    Waiting on price point and availability.
    Look great! Way better than I even thought!
    Colby
    DRTC#1159
    Quote Originally Posted by Steve '02CC View Post
    Was this an autocorrect error or are you referring to plugging $1 bills up their colon so that they can't poop?
    Quote Originally Posted by Duner View Post
    Who R/T'd in your Wheaties?

  7. #7

    Shrek's Avatar
    Pretends well

    Status
    Offline
    Join Date
    Sep 2008
    Location
    Snydersburg, MD
    Posts
    495

    Default

    Quote Originally Posted by Cheezie View Post
    Waiting on price point and availability.
    Look great! Way better than I even thought!
    this

  8. #8
    blackknight's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Mar 2009
    Location
    wapato, wa
    Posts
    6,913

    Default

    Looking good chad

  9. #9



    RTchas's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    PA
    Posts
    9,313
    Blog Entries
    2

    Default

    Nice Work Eh


    00 FR RC Dakota R/T Turbo 11.56@118

    99 Amethyst RC Dakota R/T 1-170 13.84@98

    P.I.E. tuned cause Flynn is for the Birds if you wanna Run Fast have some PIE !

    Just call me George W

  10. #10


    99blackrt's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Saskatchewan
    Posts
    874

    Default

    Lol at Chas. Say I don't suppose you can shed some light on how the a/c pulley is mounted on and if you have a spare one kicking around I could use to have an aluminum one made?
    Chad
    1999 Dodge Dakota R/T



    Mods
    Paxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s



    http://megaswf.com/s/2536929

  11. #11

    Default

    The ac pulley can only be a cover.


    "The journey is more fun than the destination"

  12. #12

    Default

    Any chance of no underdrive? As in all stock sizing?


    "The journey is more fun than the destination"

  13. #13

    Default

    Quote Originally Posted by WhiteRT View Post
    Any chance of no underdrive? As in all stock sizing?
    ^this

    I doubt the viper fan and whatnot would like underdrives...
    Colby
    DRTC#1159
    Quote Originally Posted by Steve '02CC View Post
    Was this an autocorrect error or are you referring to plugging $1 bills up their colon so that they can't poop?
    Quote Originally Posted by Duner View Post
    Who R/T'd in your Wheaties?

  14. #14


    Blown and Squirted

    Status
    Offline
    Join Date
    Jan 2008
    Location
    SE PA
    Posts
    8,150

    Default

    Do you know of a reliable source for water pumps with bolt on pulleys?

    '99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
    Z Code Performance Website

  15. #15

    Default

    Chris,

    I bought a heavy duty water pump from napa with bolt on pulley, it was from an older ram listing I believe.

    Todd


    "The journey is more fun than the destination"

  16. #16


    66shelby's Avatar
    Let the obession begin!

    Status
    Offline
    Join Date
    Apr 2010
    Location
    michigan
    Posts
    1,894

    Default

    Interested in stock sizes too.
    Also curious about pricing as well
    Some great pieces there!!!!
    <a href=http://s663.photobucket.com/user/furmanator92/media/photo16_zpsfe30c10f.jpg.html target=_blank><img src=http://i663.photobucket.com/albums/uu355/furmanator92/photo16_zpsfe30c10f.jpg border=0 alt= /></a>

    Proud owner of a Ryan Tuned truck!

  17. #17


    Bang4theBuck's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Apr 2012
    Location
    Pennsville NJ
    Posts
    755

    Default

    Its a long shot but I'm interestded in an 8 rib setup in stock sizes! maybe even a tad oversize on the crank pulley

    Vortech V-3, 52mm TB, EQ Heads, "R/T" Cam, MSaine VB, 2800 Stall, HS 1.7's, 11.6 @ 119 in 1/4

  18. #18

    Default

    They look awsome brother! Can't wait to see what they pricing will be
    2000 CC
    11.37@122


  19. #19

    Default

    also interested
    IF IT AINT RED LEAVE'R IN THE SHED
    @.50 212/218 480/480
    eddie heads
    harlin shap r.r.
    shorties headers with true duals and 3" dump tubes
    M1
    2500 stall
    456's
    Nitrous(in the works)
    53 TB with spacer/nitrous plate

  20. #20
    Senior Member

    Status
    Offline
    Join Date
    Aug 2011
    Location
    Pennsylvania
    Posts
    1,030

    Default

    Stock size or oversize next. Looking good!
    The Rides:
    2000 Black & Orange RC R/T (1 of 321)-Project Money Pit-Future ZCode truck
    2000 Flame Red CC R/T (1 of 800)- Light mods, show worthy
    2009 Yamaha Raider Raven 113ci (1900cc)
    2005 Cavalier LS Sport (DD-Canadian Z24 version)
    1953 Buick Skylark (1 of 1,690-estimated less than 50 known to exist)

  21. #21


    99blackrt's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Saskatchewan
    Posts
    874

    Default

    Sorry guys I haven't had much time lately what with the new job and all going on around here. I'll try to get pricing figured out this week.
    Chad
    1999 Dodge Dakota R/T



    Mods
    Paxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s



    http://megaswf.com/s/2536929

  22. #22
    5.9 R/T's Avatar
    13 Second Club

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Montreal, Quebec
    Posts
    729

    Default

    Also intrested in a set if the price fits my budget.
    2002 Dakota R/T CC
    13.75@99.42MPH
    1.7 RR, 160° T-Stat, 4.56 Gears, 52mm TB, Caltracs, Hotchkis TVS, K&N FIPK, M&H Drag Radial, M1 Intake, QA1's Shocks, SCT Tuner, Spintech Mid-Lenght Headers, Spintech True Dual Exhaust, Street Edge Converter, TransGo Shift Kit

  23. #23
    Senior Member

    Status
    Offline
    Join Date
    May 2013
    Location
    Calgary
    Posts
    217

    Default

    Also interested for stock size pulleys - They look awesome man!
    01 RC R/T Dakota
    KB Twin screw top mount,Modman Indy intake, (\/)opar Headers, Eddie heads+Cam+1.72 RR, 4 Link(QA1's), Hotchkis coils, Tubular C-Arms, SRT10 Wheels(18's&19's), 2x68mm SRT10 TB, Borla Mufflers w/o cats, MSD ign.

  24. #24

    Default

    Get a chance to figure out pricing yet Chad?
    2000 CC
    11.37@122


  25. #25

    Default

    Sub'd
    513-Motorsports-LLC
    A couple of turbos on an old Dakota

Page 1 of 2 1 2 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •