Just split mono left springs, caltracs, and calvert 9 way shocks on the 5th setting mounted straight up and down behind the rear and they were so damn long I put them threw the bed. On the shackle side I switch up to a ball bearing slider set up with no sway bar. That's it
Ls1 swap 11.33 n/a
Cool pics on Facebook! Did I see a certain motor that my shop owner is buying in one of the pics?
I've wanted to do a slider, could never figure it out due to our spring mounts.
My rear is basically the same set up as yours, I can drop the bottom of the shocks.
http://www.youtube.com/watch?feature...&v=Q9jnaku3Yu4
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Between ur shop you work at and my shop, their is a lot of fast shit on the streets and at the track
Dang! Good work! Truck is definitely moving!
My friends finally had some free time to make two videos of the passes. Sorry it took so long it was out of my control.
http://youtu.be/XltwrOSxe5I
http://youtu.be/_d2oA6ttiUk
Ls1 swap 11.33 n/a
Nice man. That thing is bouncy and really jumps around off the line.
98 SS/T Stock 193hp/241lb.ft Best time 60ft-2.32 1/8-10.26@69mph 1/4-15.97@85.5mph
Very cool don, me and you gotta get together one weekend this spring and line'em up at atco
Definitely hooks and books! What size are those front runners? 28s?
Yeah 28" I'm getting rid of them to get my front end down a little bit. And kris I'll be ready in a couple months I got it torn apart again swapping the tranny and finally putting heads and cam in it, new headers,and of corse more weight reduction
Ls1 swap 11.33 n/a