How about now?
Results 76 to 98 of 98
Thread: Alpha prototype dyno day results
-
03-03-2015, 12:25 AM #76
Blown and Squirted
Status- Offline
Join Date- Jan 2008
Location- SE PA
Posts- 8,150
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website
-
03-03-2015, 12:39 AM #77
DiR/T Nasty
Status- Offline
Join Date- Dec 2013
Location- PA
Posts- 1,352
Originally Posted by Five9Dak
Good now
- 99' Dodge Dakota R/T CC -
- 1 of 4 R/T Moon roof trucks; that I've seen anyway.
-
- Stock Bed, Stock Tailgate. Coming soon...
- #1253 -
-
03-03-2015, 12:46 AM #78
Senior Member
Status- Offline
Join Date- Apr 2012
Location- Pennsville NJ
Posts- 755
Oh wow! That is very conservative!
Vortech V-3, 52mm TB, EQ Heads, "R/T" Cam, MSaine VB, 2800 Stall, HS 1.7's, 11.6 @ 119 in 1/4
-
03-03-2015, 12:16 PM #79
Senior Member
Status- Offline
Join Date- Jan 2008
Location- Maricopa, AZ
Posts- 613
Unlike everyone else here, I'm not asking to be a tester (it would probably blow up my tired old beast anyway), but if you need some measurements for engine height I can take some from my 01 Durango R/T. I wasn't aware that there was a difference. Originally Posted by Five9Dak
Last edited by jweltch; 03-03-2015 at 12:51 PM.
Jason Weltch (Another Jason!)
Maricopa, AZ
-Black 2003 CC Dakota R/T 59,000mi (Under the knife for a long time, unless I hit the lottery or something.)
-Blue 2014 Hemi Ram 1500 26,000mi
-Silver 2014 Hemi Jeep Grand Cherokee 60,000mi
-Red 2001 Durango R/T 240,000mi (SOLD)
-
03-04-2015, 01:16 AM #80Blown and Squirted
Status- Offline
Join Date- Jan 2008
Location- SE PA
Posts- 8,150
Yeah I think it will definitely pick up more when I go back to the dyno and have another go. Originally Posted by Bang4theBuck
Thanks, I'll let you know. Originally Posted by jweltch
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website
-
04-02-2015, 07:21 PM #81Member
Status- Offline
Join Date- Oct 2014
Location- Indianola, WA
Posts- 55
I have a 2000 quad cab 4x4 5.9 5 speed. 2,5"true dual exhaust. I'm down to test the beta kit, and I have an sct tuner. Thx
-
04-03-2015, 02:35 AM #82Senior Member
Status- Offline
Join Date- May 2011
Location- Hammond, La
Posts- 174
I'm down for testing also.
-
04-29-2015, 11:20 PM #83Senior Member
Status- Offline
Join Date- Jan 2008
Location- .
Posts- 2,627
Still haven't seen this video yet...
-
05-01-2015, 02:22 AM #84Member
Status- Offline
Join Date- Oct 2014
Location- Indianola, WA
Posts- 55
I agree:.... Viiiideeeeooooooo lol
-
05-01-2015, 02:53 AM #85
Mr. 1200
Status- Offline
Join Date- Jun 2009
Location- Randomlake, WI
Posts- 497
I saw a video, got taken down right away though lol
2012 200
2009 Sportster Iron
2002 Dakota r/t - White
2001 Dakota r/t - Black
2000 Ram 2500 Cummins 2wd
1969 Plymouth Satellite
-
05-30-2015, 07:51 AM #86Senior Member
Status- Offline
Join Date- Aug 2011
Location- Pennsylvania
Posts- 1,030
Well shit my truck just might be done in time to test after all
The Rides:
2000 Black & Orange RC R/T (1 of 321)-Project Money Pit-Future ZCode truck
2000 Flame Red CC R/T (1 of 800)- Light mods, show worthy
2009 Yamaha Raider Raven 113ci (1900cc)
2005 Cavalier LS Sport (DD-Canadian Z24 version)
1953 Buick Skylark (1 of 1,690-estimated less than 50 known to exist)
-
08-08-2015, 02:08 PM #87Junior Member
Status- Offline
Join Date- May 2015
Location- Springfield, Mo
Posts- 15
Where are we at on this? I have some time before I will be ready to buy so I am in no rush but more curiosity. Also in for this video.
Also interested in the parts list that would come with the kit. I know you said all would be required would be fuel upgrades and a tune.
-
08-09-2015, 11:53 PM #88Blown and Squirted
Status- Offline
Join Date- Jan 2008
Location- SE PA
Posts- 8,150
Shooting for production by the end of the year.
The video will be released before then.
The kit will include (subject to change)
Air filter
Inlet tube
SRT-10 style 70mm BBK throttle body
throttle / TV cable bracket
Blower inlet
components to fit bypass valve
blower attaching plate
lower intake top plate
lower intake manifold
fuel rail mounts
fuel rails
fuel rail fittings/cross over
blower snout support
water neck
upper radiator hose
belt
idler pulley
not included but required
MX422 compressor, snout, 7 rib pulley (from original KB dodge 2.2 kit)
bypass valve (from original KB dodge 2.2 kit)
fuel pump upgrade
fuel injectors
tune (and associated hardware- 2bar, wideband, etc)
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website
-
08-10-2015, 02:36 PM #89
Senior Member
Status- Offline
Join Date- Jun 2009
Location- Katy, Texas
Posts- 1,401
- Josh
2000 Solar Yellow R/T - Cam Only Truck
1987 Buick Regal T-Type - WE4 and Blackout
2008 GMC 1500 Quad Cab
1989 Jeep YJ - Real Jeeps have Square Headlights
1971 Buick Skylark - LS SWAP THE WORLD
-
08-11-2015, 10:15 PM #90
WhiteTrash&LiLOrangeFuror
Status- Offline
Join Date- Jan 2008
Location- The "D"
Posts- 4,004
What other vehicles can this 2.2 be found on?
Year(s)? Make? Model?
-
08-14-2015, 01:52 PM #91Blown and Squirted
Status- Offline
Join Date- Jan 2008
Location- SE PA
Posts- 8,150
Every kenne bell / autorotor 2.2 compressor will work. The earlier kits came with autorotor compressors, PN MX422. The later kits were white label autorotors made for Kenne Bell called the "TS series". The kenne bell PN (carb oe) is d-271-11.
The snout is commonly called the 185mm or 7" snout.
The pulley is 7 rib and dodge magnum / 4.7 specific, I have pulleys on the shelf and can manufacture more though.
The bypass valves are also available separately, but they are pricey, around $300.
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website
-
08-14-2015, 03:54 PM #92WhiteTrash&LiLOrangeFuror
Status- Offline
Join Date- Jan 2008
Location- The "D"
Posts- 4,004
Thanks
I was looking around to see what they were selling for. But I had a hard time finding them.
-
08-18-2015, 07:40 PM #93Junior Member
Status- Offline
Join Date- May 2015
Location- Springfield, Mo
Posts- 15
So I guess the question for me becomes where do I find that particular supercharger? I am looking and finding ones off of old ford 5.4l but no new or anything like that.
-
08-18-2015, 10:39 PM #94DRTC Member #1146
Status- Offline
Join Date- Oct 2011
Location- New Jersey
Posts- 3,105
I called kenne bell a couple weeks ago to find thus info out. The snout is 5.9 specific and so is the bypass valve. Any 7 rib pulley from a dodge magnum/4.7 kit will work and all the 2.2 l head units are the same. In the words of the sales rep "good luck finding those parts, you're gonna need it. they seem to be rare"
2002 Flame Red RC R/T
272 RWHP 315 ft/lb TQ
218/226 Comp Cam, Stage 1 Ported EQ Heads, PRW 1.6 Roller Rockers, PIE Custom Tune, Full spintech exhaust with 3" side exit, 52mm Holley, Ported Kegger, Viper E-Fan, Powerdemon Trans, Hotchkis Springs, Leafs and Sway Bars, R/T 20's, Gen 3 viper seats, Custom "Rejected" State Inspection Sticker
Plenty More to come
-
08-18-2015, 11:27 PM #95DiR/T Nasty
Status- Offline
Join Date- Dec 2013
Location- PA
Posts- 1,352
I like boobies Originally Posted by Friggin' R/T
- 99' Dodge Dakota R/T CC -
- 1 of 4 R/T Moon roof trucks; that I've seen anyway.-
- Stock Bed, Stock Tailgate. Coming soon...
- #1253 -
-
08-19-2015, 04:09 AM #96Senior Member
Status- Offline
Join Date- May 2013
Location- Calgary
Posts- 217
For guys looking for the superchargers - http://www.pse.us/Products/Opcon-Aut...MX-422-New.htm Try calling this guy or try looking on http://jonbondperformance.com/
And as always, keep eyes peeled on ebay and craigslist etc.01 RC R/T DakotaKB Twin screw top mount,Modman Indy intake, (\/)opar Headers, Eddie heads+Cam+1.72 RR, 4 Link(QA1's), Hotchkis coils, Tubular C-Arms, SRT10 Wheels(18's&19's), 2x68mm SRT10 TB, Borla Mufflers w/o cats, MSD ign.
-
08-19-2015, 11:30 AM #97Senior Member
Status- Offline
Join Date- Feb 2011
Location- Tampa, FL
Posts- 487
I have a Kenne Bell for sale. Perfect condition. May have 15000 total miles on it. $1000 plus shipping. PM me.
1999 Dakota LS-swap. Fastest NA 5.9/6.0 full-weight CC. 12.76 at 109.9.
2000 Durango ZL1 AWD.
-
09-02-2015, 11:54 AM #98Blown and Squirted
Status- Offline
Join Date- Jan 2008
Location- SE PA
Posts- 8,150
I've seen three different bypass valve assemblies that shipped with the dodge kit. They are all bolt in compatible but slightly different.
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website
