Page 4 of 4 FirstFirst ... 2 3 4
Results 76 to 98 of 98

Thread: Alpha prototype dyno day results

  1. #76


    Blown and Squirted

    Status
    Offline
    Join Date
    Jan 2008
    Location
    SE PA
    Posts
    8,150

    Default

    How about now?

    '99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
    Z Code Performance Website

  2. #77

    Default

    Quote Originally Posted by Five9Dak View Post
    How about now?

    Good now
    - 99' Dodge Dakota R/T CC -
    - 1 of 4 R/T Moon roof trucks; that I've seen anyway. -
    - Stock Bed, Stock Tailgate. Coming soon...

    - #1253 -

  3. #78


    Bang4theBuck's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Apr 2012
    Location
    Pennsville NJ
    Posts
    755

    Default

    Oh wow! That is very conservative!

    Vortech V-3, 52mm TB, EQ Heads, "R/T" Cam, MSaine VB, 2800 Stall, HS 1.7's, 11.6 @ 119 in 1/4

  4. #79
    jweltch's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Maricopa, AZ
    Posts
    613

    Default

    Quote Originally Posted by Five9Dak View Post
    I don't haven't test fit on 4wd applications yet. My understanding is the motor sits higher relative to the cowl. This would require a change to the inlet manifold, so it would likely be a different kit PN. You will need fuel system and tuning changes. For a mild street setup, likely a pump, injectors, 2bar map and sct tune.
    Unlike everyone else here, I'm not asking to be a tester (it would probably blow up my tired old beast anyway), but if you need some measurements for engine height I can take some from my 01 Durango R/T. I wasn't aware that there was a difference.
    Last edited by jweltch; 03-03-2015 at 12:51 PM.
    Jason Weltch (Another Jason!)
    Maricopa, AZ
    -Black 2003 CC Dakota R/T 59,000mi (Under the knife for a long time, unless I hit the lottery or something.)
    -Blue 2014 Hemi Ram 1500 26,000mi
    -Silver 2014 Hemi Jeep Grand Cherokee ​60,000mi
    -Red 2001 Durango R/T
    240,000mi (SOLD)

  5. #80


    Blown and Squirted

    Status
    Offline
    Join Date
    Jan 2008
    Location
    SE PA
    Posts
    8,150

    Default

    Quote Originally Posted by Bang4theBuck View Post
    Oh wow! That is very conservative!
    Yeah I think it will definitely pick up more when I go back to the dyno and have another go.

    Quote Originally Posted by jweltch View Post
    Unlike everyone else here, I'm not asking to be a tester (it would probably blow up my tired old beast anyway), but if you need some measurements for engine height I can take some from my 01 Durango R/T. I wasn't aware that there was a difference.
    Thanks, I'll let you know.

    '99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
    Z Code Performance Website

  6. #81

    Default

    I have a 2000 quad cab 4x4 5.9 5 speed. 2,5"true dual exhaust. I'm down to test the beta kit, and I have an sct tuner. Thx

  7. #82
    Silver r/t's Avatar
    Senior Member

    Status
    Offline
    Join Date
    May 2011
    Location
    Hammond, La
    Posts
    174

    Default

    I'm down for testing also.

  8. #83

    Default

    Still haven't seen this video yet...

  9. #84

    Default

    I agree:.... Viiiideeeeooooooo lol

  10. #85

    Default

    I saw a video, got taken down right away though lol

    2012 200
    2009 Sportster Iron
    2002 Dakota r/t - White
    2001 Dakota r/t - Black
    2000 Ram 2500 Cummins 2wd
    1969 Plymouth Satellite

  11. #86
    Senior Member

    Status
    Offline
    Join Date
    Aug 2011
    Location
    Pennsylvania
    Posts
    1,030

    Default

    Well shit my truck just might be done in time to test after all
    The Rides:
    2000 Black & Orange RC R/T (1 of 321)-Project Money Pit-Future ZCode truck
    2000 Flame Red CC R/T (1 of 800)- Light mods, show worthy
    2009 Yamaha Raider Raven 113ci (1900cc)
    2005 Cavalier LS Sport (DD-Canadian Z24 version)
    1953 Buick Skylark (1 of 1,690-estimated less than 50 known to exist)

  12. #87
    Junior Member

    Status
    Offline
    Join Date
    May 2015
    Location
    Springfield, Mo
    Posts
    15

    Default

    Where are we at on this? I have some time before I will be ready to buy so I am in no rush but more curiosity. Also in for this video.
    Also interested in the parts list that would come with the kit. I know you said all would be required would be fuel upgrades and a tune.

  13. #88


    Blown and Squirted

    Status
    Offline
    Join Date
    Jan 2008
    Location
    SE PA
    Posts
    8,150

    Default

    Shooting for production by the end of the year.

    The video will be released before then.

    The kit will include (subject to change)
    Air filter
    Inlet tube
    SRT-10 style 70mm BBK throttle body
    throttle / TV cable bracket
    Blower inlet
    components to fit bypass valve
    blower attaching plate
    lower intake top plate
    lower intake manifold
    fuel rail mounts
    fuel rails
    fuel rail fittings/cross over
    blower snout support
    water neck
    upper radiator hose
    belt
    idler pulley

    not included but required
    MX422 compressor, snout, 7 rib pulley (from original KB dodge 2.2 kit)
    bypass valve (from original KB dodge 2.2 kit)
    fuel pump upgrade
    fuel injectors
    tune (and associated hardware- 2bar, wideband, etc)

    '99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
    Z Code Performance Website

  14. #89


    KTK00R/T's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jun 2009
    Location
    Katy, Texas
    Posts
    1,401

    Default

    - Josh

    2000 Solar Yellow R/T - Cam Only Truck
    1987 Buick Regal T-Type - WE4 and Blackout
    2008 GMC 1500 Quad Cab
    1989 Jeep YJ - Real Jeeps have Square Headlights
    1971 Buick Skylark - LS SWAP THE WORLD

  15. #90



    uwntsumrtII's Avatar
    WhiteTrash&LiLOrangeFuror

    Status
    Offline
    Join Date
    Jan 2008
    Location
    The "D"
    Posts
    4,004

    Default

    What other vehicles can this 2.2 be found on?
    Year(s)? Make? Model?
    Fu·ror noun \ˈfyu̇r-ˌȯr, -ər\ : an angry or maniacal fit

  16. #91


    Blown and Squirted

    Status
    Offline
    Join Date
    Jan 2008
    Location
    SE PA
    Posts
    8,150

    Default

    Every kenne bell / autorotor 2.2 compressor will work. The earlier kits came with autorotor compressors, PN MX422. The later kits were white label autorotors made for Kenne Bell called the "TS series". The kenne bell PN (carb oe) is d-271-11.

    The snout is commonly called the 185mm or 7" snout.

    The pulley is 7 rib and dodge magnum / 4.7 specific, I have pulleys on the shelf and can manufacture more though.

    The bypass valves are also available separately, but they are pricey, around $300.

    '99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
    Z Code Performance Website

  17. #92



    uwntsumrtII's Avatar
    WhiteTrash&LiLOrangeFuror

    Status
    Offline
    Join Date
    Jan 2008
    Location
    The "D"
    Posts
    4,004

    Default

    Thanks

    I was looking around to see what they were selling for. But I had a hard time finding them.
    Fu·ror noun \ˈfyu̇r-ˌȯr, -ər\ : an angry or maniacal fit

  18. #93
    Junior Member

    Status
    Offline
    Join Date
    May 2015
    Location
    Springfield, Mo
    Posts
    15

    Default

    So I guess the question for me becomes where do I find that particular supercharger? I am looking and finding ones off of old ford 5.4l but no new or anything like that.

  19. #94

    Friggin' R/T's Avatar
    DRTC Member #1146

    Status
    Offline
    Join Date
    Oct 2011
    Location
    New Jersey
    Posts
    3,105

    Default

    I called kenne bell a couple weeks ago to find thus info out. The snout is 5.9 specific and so is the bypass valve. Any 7 rib pulley from a dodge magnum/4.7 kit will work and all the 2.2 l head units are the same. In the words of the sales rep "good luck finding those parts, you're gonna need it. they seem to be rare"

    2002 Flame Red RC R/T
    272 RWHP 315 ft/lb TQ
    218/226 Comp Cam, Stage 1 Ported EQ Heads, PRW 1.6 Roller Rockers, PIE Custom Tune, Full spintech exhaust with 3" side exit, 52mm Holley, Ported Kegger, Viper E-Fan, Powerdemon Trans, Hotchkis Springs, Leafs and Sway Bars, R/T 20's, Gen 3 viper seats, Custom "Rejected" State Inspection Sticker
    Plenty More to come

  20. #95

    Default

    Quote Originally Posted by Friggin' R/T View Post
    "good luck finding those parts, you're gonna need it. they seem to be rare"
    I like boobies

    - 99' Dodge Dakota R/T CC -
    - 1 of 4 R/T Moon roof trucks; that I've seen anyway. -
    - Stock Bed, Stock Tailgate. Coming soon...

    - #1253 -

  21. #96
    Senior Member

    Status
    Offline
    Join Date
    May 2013
    Location
    Calgary
    Posts
    217

    Default

    For guys looking for the superchargers - http://www.pse.us/Products/Opcon-Aut...MX-422-New.htm Try calling this guy or try looking on http://jonbondperformance.com/

    And as always, keep eyes peeled on ebay and craigslist etc.
    01 RC R/T Dakota
    KB Twin screw top mount,Modman Indy intake, (\/)opar Headers, Eddie heads+Cam+1.72 RR, 4 Link(QA1's), Hotchkis coils, Tubular C-Arms, SRT10 Wheels(18's&19's), 2x68mm SRT10 TB, Borla Mufflers w/o cats, MSD ign.

  22. #97
    Senior Member

    Status
    Offline
    Join Date
    Feb 2011
    Location
    Tampa, FL
    Posts
    487

    Default

    I have a Kenne Bell for sale. Perfect condition. May have 15000 total miles on it. $1000 plus shipping. PM me.
    1999 Dakota LS-swap. Fastest NA 5.9/6.0 full-weight CC. 12.76 at 109.9.
    2000 Durango ZL1 AWD.

  23. #98


    Blown and Squirted

    Status
    Offline
    Join Date
    Jan 2008
    Location
    SE PA
    Posts
    8,150

    Default

    I've seen three different bypass valve assemblies that shipped with the dodge kit. They are all bolt in compatible but slightly different.

    '99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
    Z Code Performance Website

Page 4 of 4 FirstFirst ... 2 3 4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •