+ Reply to Thread
Results 1 to 12 of 12

Thread: R/T vs 4th gen Ram

  1. #1

    darkenedrt's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Mar 2013
    Location
    Norman, Oklahoma
    Posts
    1,259

    Default R/T vs 4th gen Ram

    Ran against a 4th gen single cab Ram with the Hemi last night and pulled it by over a length! So much for the claimed 390 horsepower


  2. #2

    Default

    Not bad. A friend of mine with just a diablo tune and stickies went 13.7@102mph the other night in 2500+DA. They weigh around 4800lbs w/o driver. They do make that power but have ridiculous drive train loss because of the 545RFE trannys, most of it is top end anyway.
    390ci 11.13@120mph N/A

    Quote Originally Posted by Adobedude View Post
    Carbs don't die....PCMs and 727's do

  3. #3



    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Corrales, New Mexico
    Posts
    17,966

    Default

    There's one that races in the Mopar Challenge series here, it runs high 16's
    11.27 @ 118.23
    2017 NM Mopar Challenge Series Champion

  4. #4

    SpoR/T driver

    Status
    Offline
    Join Date
    Feb 2011
    Location
    Lancaster, SC
    Posts
    1,284

    Default

    Quote Originally Posted by Adobedude View Post
    There's one that races in the Mopar Challenge series here, it runs high 16's
    You race in a different atmosphere, you don't count!

    '98 RC/SB - Hellcat/6 Speed Swapped
    10.18@139.8mph
    '00 AF RC R/T Under Construction!
    '01 IB RC R/T Under Construction!
    '99 SY CC R/T Sold
    '00 AF RC R/T Sold
    DRTC Member #1181

  5. #5

    Default

    Quote Originally Posted by BlakDak71 View Post
    You race in a different atmosphere, you don't count!
    This^
    390ci 11.13@120mph N/A

    Quote Originally Posted by Adobedude View Post
    Carbs don't die....PCMs and 727's do

  6. #6
    RD03RT's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Mar 2008
    Location
    Yucca Valley, CA.
    Posts
    102

    Default

    The day after I drove my 2010 Ram S/B off the showroom floor it was on the dyno Posted 312 RWHP
    Raced it at Vegas ran 14:10 off the street.
    Runs better now with CAI, tuner adjust and better tires.
    I'll run it again if I can barrow it from the other half???

  7. #7

    Default

    Im kinda shocked by a 14.1. I would've expected a 15-15.5

  8. #8
    RD03RT's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Mar 2008
    Location
    Yucca Valley, CA.
    Posts
    102

    Default

    Quote Originally Posted by dan holmes View Post
    Im kinda shocked by a 14.1. I would've expected a 15-15.5
    If it would of run in Indiana it would of been a 13.1

  9. #9
    Senior Member

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Ponca City, OK
    Posts
    205

    Default

    Torque management and horrible factory converters kills those trucks.
    2012 Express
    Mcgaughy's 2/4
    On the hunt for another

  10. #10
    clrwatrtomsrt's Avatar
    Uncle Tommy

    Status
    Offline
    Join Date
    Jan 2012
    Location
    Pinellas Park, Florida
    Posts
    588

    Default

    not to mention that they're just plain ugly!

  11. #11
    Senior Member

    Status
    Offline
    Join Date
    Feb 2010
    Location
    Ponca City, OK
    Posts
    205

    Default

    I'd have to disagree with you there ^^
    2012 Express
    Mcgaughy's 2/4
    On the hunt for another

  12. #12


    Broo42's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jul 2012
    Location
    Yukon, OK
    Posts
    2,050

    Default

    Quote Originally Posted by 2k2Rango View Post
    I'd have to disagree with you there ^^
    This^^^^^^^^
    2004 SRT4 Moar Pah Coming DD
    2002 Dakota R/T 12.376@110.84


    "Is there any way to make this easier? I'm way confused now. I just tried to post a video, but instead I got my dick caught in the ceiling fan" Wyotech_Cuda440

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •