+ Reply to Thread
Results 1 to 1 of 1

Thread: Custom HiPoTek Dodge Magnum 3.9 Big Bore Throttle Bodies

  1. #1

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,975

    Default Custom HiPoTek Dodge Magnum 3.9 Big Bore Throttle Bodies

    Custom HiPoTek Big Bore OEM Dodge Magnum Throttle Bodies are available for the 3.9 V6 engine. They are precision machined on a mill and lathe which provides true and identical matching bores that can't be obtained modifying the throttle body by hand. They are available with a smooth taper bore, are radiused at the top, the throttle shaft is milled on both sides for increased flow, both sides of the throttle shaft are retained to prevent flexing or possible breakage while under boost, they utilize low profile stainless steel button head throttle plate screws, the butterfly plates are custom machined from T6061 aluminum, have the correct screw hole offset, the correct distance between mounting screws, the correct angle at the margins, and are set with the correct clearance in relation to the desired bore diameter, with the correct elliptical shape to perfectly fit the modified OEM throttle body. I can also machine a custom size TB upon special request. Comes with gasket and low profile streamlined button head screws.

    HiPoTek 1992-1993 3.9 V6 Throttle Body


    44mm: http://stores.hi-potek.com/44mm-perf...agnum-1992-93/


    HiPoTek 1994-1995 3.9 V6 Throttle Body


    44mm: http://stores.hi-potek.com/44mm-perf...agnum-1994-95/



    HiPoTek 1996-2003 3.9 V6 Throttle Body

    Shown is the 46mm throttle body.

    46mm: http://stores.hi-potek.com/46mm-perf...agnum-1996-03/
    Last edited by 98Dak408; 07-13-2016 at 10:58 AM.

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •