Make this thread a sticky, ASAP! Attached is the info for my 01+ Dakota r/t and how I removed the remaining two CEL (Gov. pressure sensor, an trans temp sensor). They are integrated in the same sensor, buy a new one from any dodge dealer and tie the wires in and match the colors to correct pins as I show below. (Note, they're are two violet/white wires in the tranny harness, you will need to hook up a test light to either one to find the power wire when the key is on and that is the 5v supply to this sensor). Ryan Hogan has done all of my tunes and helped in a big way to get me to this point! Enjoy!
Video:http://www.youtube.com/watch?v=-h3Gt...ature=youtu.be