Do you have an ETA on these kits? I already have a KB supercharger.
Do you have an ETA on these kits? I already have a KB supercharger.
1997 and 1998 Ram SS/T -Black/Silver-
1997 Ram LWB - Supercharged, 4/6 drop (36K)
1998 Dak R/T CC -Black- Returning to Stock (45k) For Sale
2000 Dak R/T CC -Red- 408 (37k) Lots of Mods 13.03 ET 1/4 Ennis, TX
2001 Dak R/T RC -Silver-flamed- F&B 52MM, MP M1 2BBL, MP VC, 1.6 RR, Elite Customs GTS Ram Air Hood w/ K&N 14" w/ Ex Lid, Hotchkis TVS, ARE Bed Cvr, Chr 17" R/T, Gen 1 Viper Brakes 14.64 ET 1/4 Ennis, TX 2012
2002 Dur R/T - SP360 Body Kit with 7" Driving Lights, 3" Drop, 20" Black RTS Wheels, K&N (134k)
2011 Ram R/T - Stock 390HP (31k) - My Daily 14.01 ET 1/4 Ennis, TX
2012 Dur Citadel - Stock 370HP (34k) - Wife's Daily
Previous Dodges
1991 Dodge Stealth R/T Twin Turbo -Red- Sold
1999 Dak R/T CC -IB- Sold (Steelhorse)
Hey Bob, the production kits are scheduled to be availible this spring. If you have any questions you can post them here, or contact me via email.
chris@zcodeperformance.com
www.zcodeperformance.com
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website
From a guy that doesn't know much about boost...
At 6 psi, what is the highest compression ratio you'd want to run
What cam would you recommend
408, HiPoTek, FRP Tuning, Martin Saine 46re12.33 @ 1102018 Renegade Raceway Summit Series Sportsman Champion
Iron head or aluminum, what octane, meth injection or hot air?
As far as cam- I'm no cam guru. I would refer you bullet, mike jones, or comp cams if you don't want to pay a premium.
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website
Depending on the cam profile and how much cylinder pressure it builds down low I wouldn't want much more than 9.5:1. If the cam is big, you can get away with more mechanical compression. Spraying meth would be a lot cheaper than changing pistons for lower compression though.
I'm guessing you're ready to step up from your NA 408? What cam is in it now, do you know what cranking compression it has?
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website
408, HiPoTek, FRP Tuning, Martin Saine 46re12.33 @ 1102018 Renegade Raceway Summit Series Sportsman Champion
Bore 4.03 inches, stroke 4.0 inches, rod c-c length 6.123 inches, with a static compression ratio of 9.8 :1. Your camshaft specifications call for an inlet valve closing of 48 degrees ABDC (after bottom dead center).
Your chamber volume is 95.01 cc's. With this camshaft your dynamic, or effective stroke is 3.52 inches. Your dynamic compression ratio is 8.74 :1 corrected for cam timing, altitude, and rod length. Your dynamic cranking pressure, corrected for cam timing, rod length and altitude is 178.21 PSI. Your dynamic boost compression ratio, reflecting static c.r., cam timing, altitude, and 6 PSI is 12.31 :1.
I had to guess on your intake centerline for the intake closing event to get the 175psi cranking you see.
You are into race gas territory with that DCR and 6psi. With iron heads, I would be spraying a lot of meth down it's throat if you want to run 92. A cam swap might be able to bleed a bit more off.
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website
1997 and 1998 Ram SS/T -Black/Silver-
1997 Ram LWB - Supercharged, 4/6 drop (36K)
1998 Dak R/T CC -Black- Returning to Stock (45k) For Sale
2000 Dak R/T CC -Red- 408 (37k) Lots of Mods 13.03 ET 1/4 Ennis, TX
2001 Dak R/T RC -Silver-flamed- F&B 52MM, MP M1 2BBL, MP VC, 1.6 RR, Elite Customs GTS Ram Air Hood w/ K&N 14" w/ Ex Lid, Hotchkis TVS, ARE Bed Cvr, Chr 17" R/T, Gen 1 Viper Brakes 14.64 ET 1/4 Ennis, TX 2012
2002 Dur R/T - SP360 Body Kit with 7" Driving Lights, 3" Drop, 20" Black RTS Wheels, K&N (134k)
2011 Ram R/T - Stock 390HP (31k) - My Daily 14.01 ET 1/4 Ennis, TX
2012 Dur Citadel - Stock 370HP (34k) - Wife's Daily
Previous Dodges
1991 Dodge Stealth R/T Twin Turbo -Red- Sold
1999 Dak R/T CC -IB- Sold (Steelhorse)
Couldn't you run a thicker head gasket to decrease compression? I know it's a common trick in the tuner scene. Do they make cometics for these motors?
Checking back in on this.
1997 and 1998 Ram SS/T -Black/Silver-
1997 Ram LWB - Supercharged, 4/6 drop (36K)
1998 Dak R/T CC -Black- Returning to Stock (45k) For Sale
2000 Dak R/T CC -Red- 408 (37k) Lots of Mods 13.03 ET 1/4 Ennis, TX
2001 Dak R/T RC -Silver-flamed- F&B 52MM, MP M1 2BBL, MP VC, 1.6 RR, Elite Customs GTS Ram Air Hood w/ K&N 14" w/ Ex Lid, Hotchkis TVS, ARE Bed Cvr, Chr 17" R/T, Gen 1 Viper Brakes 14.64 ET 1/4 Ennis, TX 2012
2002 Dur R/T - SP360 Body Kit with 7" Driving Lights, 3" Drop, 20" Black RTS Wheels, K&N (134k)
2011 Ram R/T - Stock 390HP (31k) - My Daily 14.01 ET 1/4 Ennis, TX
2012 Dur Citadel - Stock 370HP (34k) - Wife's Daily
Previous Dodges
1991 Dodge Stealth R/T Twin Turbo -Red- Sold
1999 Dak R/T CC -IB- Sold (Steelhorse)
Hey five9dak, are Richards 6an fuel rails and a M1 2bbl more than enough for the original Kb set up or would you suggest the 8an and a 4bbl.
Also do you make pulleys for the mx422 I have the 6lb was hoping somebody makes aftermarket 9lb but can't find them anywere
The Rides:
2000 Black & Orange RC R/T (1 of 321)-Project Money Pit-Future ZCode truck
2000 Flame Red CC R/T (1 of 800)- Light mods, show worthy
2009 Yamaha Raider Raven 113ci (1900cc)
2005 Cavalier LS Sport (DD-Canadian Z24 version)
1953 Buick Skylark (1 of 1,690-estimated less than 50 known to exist)
Yeah I just talked to him about the kit at Carlisle. Hopefully about a month before stuff starts happening
The Rides:
2000 Black & Orange RC R/T (1 of 321)-Project Money Pit-Future ZCode truck
2000 Flame Red CC R/T (1 of 800)- Light mods, show worthy
2009 Yamaha Raider Raven 113ci (1900cc)
2005 Cavalier LS Sport (DD-Canadian Z24 version)
1953 Buick Skylark (1 of 1,690-estimated less than 50 known to exist)
Prototype kit is running, I'm shaking the bugs out of it now. I have a few small improvements I want to make then I'll go into beta testing.
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website
6AN and 2bbl are fine, the KB inlet plumbing will be a restriction before the 2bbl or the fuel rails.
KB should still be able to sell you pulleys. If not, I will look into having some made.
Sorry for the late response, these posts just slipped by.
I can supply -6, -8 or -10 rails on production kits. The prototype I'm running right now has -6. Should be more than enough to blow up a stock motor.
Last edited by Five9Dak; 07-15-2013 at 10:59 PM.
'99 R/T- MSIIextra fuel/spark/idle, ZCP mx422 supercharged, ZCP Tbrake 727, PPC 10" 3800, 4.10, (\/) Headers, 2.5" Duals, Truetrac, Boyd Timeless 6's, Hotchkis TVS.
Z Code Performance Website