Closed Thread
Results 1 to 3 of 3

Thread: HiPoTek Vacuum Tree

  1. #1

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,975

    Default HiPoTek Vacuum Tree

    The HiPoTek intake manifold vacuum tree is for use with the M1 4-bbl intake manifold, and other intake manifolds utilizing a 3/8 NPT vacuum port.

    This vacuum tree is designed for excellent vacuum signal, flow, and vacuum strength. Where pressure builds with a smaller orifice, vacuum tends to build with a larger orifice, allowing the force of vacuum to build up more quickly and completely. So where flow and vacuum strength may be needed for the PCV circuit and brake booster for example, larger fittings are incorporated and beneficial.

    • Manifold end 3/8 NPT. Screws right into the M1 4-bbl intake manifold.
    • Power brake booster at other end uses a 3/8 NPT to 3/8 barbed fitting.
    • Map signal (lower left hand side) 1/8 barbed fitting. This allows for a single size hose from the map sensor to the vacuum tree, without reducers and different size hoses spliced together.
    • PCV valve (upper left hand side) 3/8 barbed fitting. This allows for excellent flow from the PCV valve to the intake manifold.
    • Other two accessory fittings (upper and lower right hand side) 1/4 barbed fittings.


    http://stores.hi-potek.com/-strse-VA...Categories.bok

    Last edited by 98Dak408; 07-13-2016 at 11:00 AM.

  2. #2
    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Dallas, TX
    Posts
    723

    Default

    Do you have a diagram or picture of how this looks installed?
    1997 and 1998 Ram SS/T -Black/Silver-
    1997 Ram LWB - Supercharged, 4/6 drop (36K)
    1998 Dak R/T CC -Black- Returning to Stock (45k) For Sale
    2000 Dak R/T CC -Red- 408 (37k) Lots of Mods 13.03 ET 1/4 Ennis, TX
    2001 Dak R/T RC -Silver-flamed- F&B 52MM, MP M1 2BBL, MP VC, 1.6 RR, Elite Customs GTS Ram Air Hood w/ K&N 14" w/ Ex Lid, Hotchkis TVS, ARE Bed Cvr, Chr 17" R/T, Gen 1 Viper Brakes 14.64 ET 1/4 Ennis, TX 2012
    2002 Dur R/T - SP360 Body Kit with 7" Driving Lights, 3" Drop, 20" Black RTS Wheels, K&N (134k)
    2011 Ram R/T - Stock 390HP (31k) - My Daily 14.01 ET 1/4 Ennis, TX
    2012 Dur Citadel - Stock 370HP (34k) - Wife's Daily

    Previous Dodges
    1991 Dodge Stealth R/T Twin Turbo -Red- Sold
    1999 Dak R/T CC -IB- Sold (Steelhorse)

  3. #3

    98Dak408's Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2009
    Location
    Detroit Area, Michigan
    Posts
    2,975

    Default

    Do you have a diagram or picture of how this looks installed?
    Not at the moment. It screws into the back of the M1 4-bbl intake manifold.

Closed Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •