I can give you more precise measurements if you can do it, but I was wondering if you could make vinyl cutouts of say mopar or r/t logos that could be used as a stencil for spraying a logo on a trans cooler/radiator?
Thanks,
WB
I can give you more precise measurements if you can do it, but I was wondering if you could make vinyl cutouts of say mopar or r/t logos that could be used as a stencil for spraying a logo on a trans cooler/radiator?
Thanks,
WB
Its HEAVILY MODDED! Just don't look under my hood or try to race me!
01 RC Silver R/T
Edelbrock Headers
2/4 Lowering Kit
MSD 6AL + Blaster SS Coil
Mopar Perf. Air Cleaner
Hipotek S-Bolt
52mm TB
Fresh 46RE w/ Transgo Street/Strip Shift Kit
Mopar Perf. "2300" Stall
180 T-STAT
MOPAR PERF. RT CAM COMING SOON
I have stencil material, not sure how well it'll stick to the edges of a finned-type cooler if it's on the edges of the fins (decals are all about surface/adhesive area). Is that the type of cooler you are referring too? The R/T logos (except the classic style) and the basic Moper M logo could all be easy cardboard cut outs (no floating pieces to the designs) so thay shoud be easy enough to do at home and little or no cost besides some time. The Mopar word has lots of floating parts (centers of the o, p, a, and r). or the outline M logo.
Glen Renzoni
Super Dak© Etching and Decals
'99 Solar Yellow RC Dakota R/T Supercharged 408
'05 Orange Blast Stage 2 SRT-4 Turbocharged 2.4
'16 Mojave Sand Mangler Unlimited Sport 3.6
the Super Dak© Home Page
www.totacc.com/user/glenzoni/
(note: e-mail changed to @yahoo)