Results 1 to 2 of 2

Thread: Trans cooler stencils

  1. #1

    Default Trans cooler stencils

    I can give you more precise measurements if you can do it, but I was wondering if you could make vinyl cutouts of say mopar or r/t logos that could be used as a stencil for spraying a logo on a trans cooler/radiator?

    Thanks,
    WB
    Its HEAVILY MODDED! Just don't look under my hood or try to race me!

    01 RC Silver R/T
    Edelbrock Headers
    2/4 Lowering Kit
    MSD 6AL + Blaster SS Coil
    Mopar Perf. Air Cleaner
    Hipotek S-Bolt
    52mm TB
    Fresh 46RE w/ Transgo Street/Strip Shift Kit
    Mopar Perf. "2300" Stall
    180 T-STAT

    MOPAR PERF. RT CAM COMING SOON

  2. #2
    Super Dak©'s Avatar
    Supporting Vendor

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Omicron Persei 8
    Posts
    88

    Default

    I have stencil material, not sure how well it'll stick to the edges of a finned-type cooler if it's on the edges of the fins (decals are all about surface/adhesive area). Is that the type of cooler you are referring too? The R/T logos (except the classic style) and the basic Moper M logo could all be easy cardboard cut outs (no floating pieces to the designs) so thay shoud be easy enough to do at home and little or no cost besides some time. The Mopar word has lots of floating parts (centers of the o, p, a, and r). or the outline M logo.
    Glen Renzoni
    Super Dak© Etching and Decals
    '99 Solar Yellow RC Dakota R/T Supercharged 408
    '05 Orange Blast Stage 2 SRT-4 Turbocharged 2.4
    '16 Mojave Sand Mangler Unlimited Sport 3.6
    the Super Dak© Home Page
    www.totacc.com/user/glenzoni/
    (note: e-mail changed to @yahoo)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •