Results 1 to 5 of 5

Thread: Great customer service!!!!!!!!!

  1. #1


    Senior Member

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Amherstburg, Ontario
    Posts
    224

    Default Great customer service!!!!!!!!!

    Thanks again for the great customer service on the caltrac group buy. These things are awsome!
    drtc_logo001:
    2001 DAKOTA R/T
    F&B 52x55, M1 4bbl with 2bbl adaptor, Edelbrock 2.02 heads, Harland Sharp 1.7 adjustable rr, Comp 264HR-12 cam, Spintech mids, Spintech exhaust, Asp crank pulley, Msd 6al,Msd Blaster HVC coil, Taylor 10.4mm Thunder wires, NGK BKR6E, PIE Gc e-fan, Sct by FRP, Belltech 1" front 2" rear, Caltracs, Hotchkis sways, Hipotek driveshaft loop and Torque strap, A/C delete , Heater delete, Clutch fan delete, Viper 18" wheels , Walbro 255 lph fuel pump.

  2. #2

    Default

    I agree, great job on the group buy!
    408, HiPoTek, FRP Tuning, Martin Saine 46re
    12.33 @ 110
    2018 Renegade Raceway Summit Series Sportsman Champion

  3. #3


    Senior Member

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Amherstburg, Ontario
    Posts
    224

    Default

    Hey mikset how fast did you run this year in the 1/4. I plan on doing 4.56 this year just wondering if you noticed a difference.
    drtc_logo001:
    2001 DAKOTA R/T
    F&B 52x55, M1 4bbl with 2bbl adaptor, Edelbrock 2.02 heads, Harland Sharp 1.7 adjustable rr, Comp 264HR-12 cam, Spintech mids, Spintech exhaust, Asp crank pulley, Msd 6al,Msd Blaster HVC coil, Taylor 10.4mm Thunder wires, NGK BKR6E, PIE Gc e-fan, Sct by FRP, Belltech 1" front 2" rear, Caltracs, Hotchkis sways, Hipotek driveshaft loop and Torque strap, A/C delete , Heater delete, Clutch fan delete, Viper 18" wheels , Walbro 255 lph fuel pump.

  4. #4

    Default

    14.04 is my best with the mods you see listed. I think I ran around 14.7 before 4.56's but can't attribute all that to gears because I did intake, TB, exhaust, headers and gears all about the same time.
    408, HiPoTek, FRP Tuning, Martin Saine 46re
    12.33 @ 110
    2018 Renegade Raceway Summit Series Sportsman Champion

  5. #5


    Senior Member

    Status
    Offline
    Join Date
    Dec 2009
    Location
    Amherstburg, Ontario
    Posts
    224

    Default

    THATS PRETTY DAMN GOOD MY QUICKEST WAS 14.19 BEFORE THE CALTRACS, MSD, HEADS AND CAM. I THINK IM GOING TO LOOK INTO SOME 4.56s AND M SAINE VALVE BODY AND CONVERTER.
    drtc_logo001:
    2001 DAKOTA R/T
    F&B 52x55, M1 4bbl with 2bbl adaptor, Edelbrock 2.02 heads, Harland Sharp 1.7 adjustable rr, Comp 264HR-12 cam, Spintech mids, Spintech exhaust, Asp crank pulley, Msd 6al,Msd Blaster HVC coil, Taylor 10.4mm Thunder wires, NGK BKR6E, PIE Gc e-fan, Sct by FRP, Belltech 1" front 2" rear, Caltracs, Hotchkis sways, Hipotek driveshaft loop and Torque strap, A/C delete , Heater delete, Clutch fan delete, Viper 18" wheels , Walbro 255 lph fuel pump.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •