Well pretty much have everything tweaked the way I want. Now just have to order some more materials. Here's a glimpse at the jigs. Looks like a cluster f*^k.
Well pretty much have everything tweaked the way I want. Now just have to order some more materials. Here's a glimpse at the jigs. Looks like a cluster f*^k.
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
Those are gonna be sweet....
11.27 @ 118.232017 NM Mopar Challenge Series Champion
Can't wait to buy these headers!
whats going to be the price on these? i have LT hookers ceramic coated from ol Krc, and i pd a G! for them. and when i had a/c i never had to remove it, just the steering shaft and lower the rack & pionion, plus cut a little bit of the A arm hangers.
Haven't got the price calculated yet as I need to figure out how much materials are going into it. I'm waiting on a few prices from places around here for the flanges. As for having to cut anything that won't be necessary to make these fit. There are a few tighter areas but still have clearance. I need to get a truck that has a/c in the shop so I can test fit to see if they will fit. The issue is likely going to be the install. For now the reason these are for non-a/c is because thats what I've had to mock from. I could see then maybe fitting but to install you'd have to remove the canister from the firewall and pull the lines out of the way. Also looking into coating prices as well. These are a custom build not a ram header modified to fit so they will be a touch more in price I'm going to guess but once I calculate everything I'll let you know.
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
See if anyone on here can make the flanges? PIE or Brandon come to mind.
2003 Dakota R/THibernationPrevious Best10.77@124
*Disclaimer - All suggestions given for performance modifications is assuming that you live close or at Sea Level
2003 Dakota R/THibernationPrevious Best10.77@124
*Disclaimer - All suggestions given for performance modifications is assuming that you live close or at Sea Level
chad, sent you your quote, lmk!
99 IB CC 6.7 727 Black 20" R/T's Accel DFI standalone
99 DA CC sold!
1pc port plates FOR SALE, pm for details
I've been talking with Dave as well as a local company. I want to try and support those of you on here helping the group out so I'm likely going to go with Dave!
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
Good stuff
2003 Dakota R/THibernationPrevious Best10.77@124
*Disclaimer - All suggestions given for performance modifications is assuming that you live close or at Sea Level
DEF. interested in a set they sound like they will be above the rest of the options out there.
99 BK cc RT, Daily Driver
Thanks Joe, yeah I took that into consideration and they will fit with sc setups. I used my truck for part of the mock up. Only thing I don't have is an a/w intercooler set up ...... yet but I have a mock up intercooler made and it clears that too so all should be good.
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929
You got my intrest, I was quoted $850 for a custom set of headers made for my truck. You don't gotta worry about the tranny crossmember on my truck either.
DEPUTY
This signature has been deleted thanks to photobucket!
Any updates?
410, 10.3 comp pistons, P&P Eddies, 254 cam, 30lb injectors, sct tuner, 3800 viper stall, 4:56 yukon gears, hotchkis tvs, m1 4brrl, 58mm f&b tb, 1.7 rr, electric fan, jm longtube headers, B&M hammer shifter, Cope Racing Trans, Viper Brakes, SRT8 Seats, nx wet kit(100 shot)
best time 11.32 @ 118 1.59 60' on spray(old motor). 11.76@115 n/a(new motor)
DD 07 SRT8 Charger 12.55@112
bump for updates and deputy were you getting those for $850
99 BK cc RT, Daily Driver
Sorry I haven't provided an update as of late. I'm currently in the process of switching custom brokers and the fact of the matter is its cheaper to bring the pipe up from the USA vs buying it locally. This should be finalized early next week then the shipment of bends I ordered will be able to clear customs. Once I receive them I'm going to take a few days off work to work on the first for Dan.
Chad1999 Dodge Dakota R/T
ModsPaxton Novi 2k Supercharger @ 12lbs, 2.02R/T Stage III port/polish w/5 angle valve job, 58mm F&B TB, M1 4bbl, 1.6 HS Roller Rockers, Custom Cam, JP double roller timing chain, MP lifters, Custom Long Tube Headers, Dual 3" Exhaust (no cats), SCT, Viper 3000 Stall Converter, 4.56 Yukon Gears, Caltracs, M&H 325/45/17s
http://megaswf.com/s/2536929