I fabricated this panhard rod/trac bar set-up for one of the fellow Dakota guys with an R/T and 9.25 rear end. Even though the truck has leaf springs, under extreme side load, such as hard cornering, the axle still shifts from side-to-side. This set-up locks the axle in place and improves handling. I tested the prototype on my truck for several months of daily driving. It is definitely an improvement.
It mounts using existing holes in the frame. It is designed with clearance for the exhaust, a differential cover/girdle such as LPW...as well as the spare tire.
It also works well with the Hotchkiss TVS, the HiPotek X-brace…and traction bars.
Note: Shown with stainless steel hardware at additional expense to the customer.