Does anyone know what size spaces I will need for the 10 spoke viper wheels on my 03 clubcab . Nothing too big I don't want the tires sticking out past the fender flares..and where I can get them...any links..thank youu
Does anyone know what size spaces I will need for the 10 spoke viper wheels on my 03 clubcab . Nothing too big I don't want the tires sticking out past the fender flares..and where I can get them...any links..thank youu
1.25 for the rear and 1.375 for the front. Get them from Fred and wheeladapter.com you want the wheel and hub centric spacers.
Dakotaless
Do you think I can.go with a 1 inch spacer how does the 1.25 look does the wheel stick out past the fender flares
No you cannot run a 1" spacer on the rear you will run the springs. This is what it looks like it's not as bad as the picture makes it look. The rim is actually inside the flares but because the body is curve the tire sticks out alittle.
Dakotaless
ok please let me know the size thickness of the spacers ill be sure to take em off you hands...
thank you for the pics can u send more of the side of the truck so i can get a better feel for how my trucks gonna look and id like to see your tire size setup my trucks the name color also so it would be perfect
I'm going to run less than a 1/2'' spacer in the front. You have 1/8'' to 1/4'' clearance without a spacer at all with stock control arms at full turn. I'd rather have a little extra room and bring the wheel out some though.
I just orderd the spacers , what lug nuts are you guys using
What spacers did you end up going with?
01 RC R/T Dakota KB Twin screw top mount,Modman Indy intake, (\/)opar Headers, Eddie heads+Cam+1.72 RR, 4 Link(QA1's), Hotchkis coils, Tubular C-Arms, SRT10 Wheels(18's&19's), 2x68mm SRT10 TB, Borla Mufflers w/o cats, MSD ign.
1.25 " adapters will keep it off the lower arm at full lock and get the tire out a little past the FF so it's not "tucked"
00 FR RC Dakota R/T Turbo 11.56@118
99 Amethyst RC Dakota R/T 1-170 13.84@98
P.I.E. tuned cause Flynn is for the Birds if you wanna Run Fast have some PIE !
Just call me George W
Ya, some may think this is dumb and waste of money... But im getting custom control arms made to fit these wheels instead of using the adapters. Yep it's probably more money, but it will be what it takes for me to get the "look" im going for.
The guy making my control arms is local and compared to the price of wheel adapters + raising the truck back up to fit the wheels - not much difference.
01 RC R/T Dakota KB Twin screw top mount,Modman Indy intake, (\/)opar Headers, Eddie heads+Cam+1.72 RR, 4 Link(QA1's), Hotchkis coils, Tubular C-Arms, SRT10 Wheels(18's&19's), 2x68mm SRT10 TB, Borla Mufflers w/o cats, MSD ign.
I don't think that's dumb at all, I'd love to see this project updated with pictures. The biggest issue for me was not just the rubbing on the arm but the "look" of fronts tucked inside the wheel well I couldn't stand it ...lol
Had I more $ I would have made a rear axle to fit them without adapters too and tubular arms to get the tire to fit out frt like your doing.
00 FR RC Dakota R/T Turbo 11.56@118
99 Amethyst RC Dakota R/T 1-170 13.84@98
P.I.E. tuned cause Flynn is for the Birds if you wanna Run Fast have some PIE !
Just call me George W
I won't have any pictures until fall/winter when I dig into it. Spent too much time last summer dealing with work/supercharger and other bolt one that I am just driving it all summer and stock piling parts for winter. Hopefully winter will bring a zcode kit too!
01 RC R/T Dakota KB Twin screw top mount,Modman Indy intake, (\/)opar Headers, Eddie heads+Cam+1.72 RR, 4 Link(QA1's), Hotchkis coils, Tubular C-Arms, SRT10 Wheels(18's&19's), 2x68mm SRT10 TB, Borla Mufflers w/o cats, MSD ign.
1.375 rear
1998 Silver RC SLT - Hughes 2.02 Heads, Mopar M1 4bbl Intake, Mopar 4bbl TB, 230/236 .515/.515 on a 110, 1.6 Roller Rockers, 4.10's, Spintech Headers, 3" Duals, X Pipe, Chambered Mufflers, 4/4 Drop, 727 Full Manual w/Transbrake, PTC 4500 Stall
12.90 at 104mph
so does any one have the correct details on what to use??? 1" in front and 1.25 rears??
1.25 all the way around. Looks great and no issues.
thanks my friend how the he'll have you been??
No problem Brian. Ive been good man, thanks for asking. Finally got the truck back on the road so happy about that. How about you?
hopefully have them on for the next cars and coffee in jax