+ Reply to Thread
Results 1 to 16 of 16

Thread: Converter cores please!

  1. #1
    Supporting Vendor

    Status
    Offline
    Join Date
    Feb 2010
    Location
    SoCal
    Posts
    69

    Default Converter cores please!

    Hello all!
    I want to thank all of you for your support for many years now. I have worked diligently over the years to keep costs down and provide quality products at prices the average enthusiast can afford.
    Unfortunately, my supplies of 46RE 90degree converters has run very low lately.
    I am now in need and am reaching out for some assistance from you, the Dodge community.


    In order to prevent cost increases or core charges on converters I'm asking if any of you have stock 46RE converters for cores please contact me!
    The cores I need will be in all 518, 46RH, and 46RE transmissions from '92 up in Dakotas, Durangos, and Rams. They will be stamped 90 on the engine side of the converter.

    Please pass the word...

    Thanks guys!
    Martin
    msaine1213@aol.com

  2. #2



    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Corrales, New Mexico
    Posts
    17,966

    Default

    I have one 2001 46RE
    11.27 @ 118.23
    2017 NM Mopar Challenge Series Champion

  3. #3


    99dart's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Washington...the hot side!
    Posts
    3,886

    Default

    I'll have one to send in when I get the one from you! What do you recommend for size of an external trans cooler w/your convertor?


    Quote Originally Posted by Saineperf View Post
    Hello all!
    I want to thank all of you for your support for many years now. I have worked diligently over the years to keep costs down and provide quality products at prices the average enthusiast can afford.
    Unfortunately, my supplies of 46RE 90degree converters has run very low lately.
    I am now in need and am reaching out for some assistance from you, the Dodge community.


    In order to prevent cost increases or core charges on converters I'm asking if any of you have stock 46RE converters for cores please contact me!
    The cores I need will be in all 518, 46RH, and 46RE transmissions from '92 up in Dakotas, Durangos, and Rams. They will be stamped 90 on the engine side of the converter.

    Please pass the word...

    Thanks guys!
    Martin
    msaine1213@aol.com
    Last edited by 99dart; 03-16-2011 at 04:11 AM.
    99 DA CC R/T
    13.97@100 w/modded kegger & ported TB
    12.96 @103
    10:8-1 .30 over forged bottom end
    R/T ported heads
    Detroit locker 4:56 gears
    Built 46RE MSaine 3500 stall Ultra Billet
    http://imgur.com/a/lOVuZ

  4. #4
    Step bumer & CCW's FTW!

    Status
    Offline
    Join Date
    Jun 2008
    Location
    Plattsburgh, NY
    Posts
    1,973

    Default

    I have a 2001 46RE converter.

    2012 RAM R/T
    Belltech.

    2010 Challenger R/T
    Hurst. Billet Tech. Hop Not. SLP.

  5. #5

    Default

    ive got a 42re valvebody and converter plus a 99 46re valvebody, ill have a 46re converter also been need a 2800 stall from you first, feel free to PM me what ya would want
    Brad
    00 CC IB sport 360
    98 RC white sport mildly worked v6, used as a truck!

  6. #6
    Supporting Vendor

    Status
    Offline
    Join Date
    Feb 2010
    Location
    SoCal
    Posts
    69

    Default

    I recommend the biggest cooler you can get on the truck! If you run through the factory radiator, then through the auxiliary cooler, there's little chance of running it too cool.

    We'll work out something on your core return when I get yours built.

    Thanks,
    Martin

    Quote Originally Posted by 99dart View Post
    I'll have one to send in when I get the one from you! What do you recommend for size of an external trans cooler w/your convertor?

  7. #7
    Supporting Vendor

    Status
    Offline
    Join Date
    Feb 2010
    Location
    SoCal
    Posts
    69

    Default

    Thanks for the replies guys!
    Another great reason why I support you!

  8. #8


    krs1r/t's Avatar
    want more inchs STROKE IT

    Status
    Offline
    Join Date
    Aug 2009
    Location
    vineland, nj
    Posts
    5,863

    Default

    Quote Originally Posted by Saineperf View Post
    Thanks for the replies guys!
    Another great reason why I support you!
    i think i have an 03 sitting in a box

    Bad Luck Truck
    Current setup
    „R„block 429ci W5 heads 700hp N/A
    1/8 mile #'s 6.47@105 1.37 60’ 10.23@131

    Old 1/4 numbers below with 408
    Fastest N/A 2010,2011,2014
    477-RWHP ?-RWTQ

    11.244 ET @ 119.71mph N/A
    FOXHOLE RACING
    "If you like me good, if you hate me, even better!"
    Chris

  9. #9
    Senior Member

    Status
    Offline
    Join Date
    Aug 2008
    Location
    Triangle, VA
    Posts
    1,072

    Default

    I've got two stock 46re converters.

  10. #10

    Default

    I got 2 sitting here if you want them
    2001 black rc

  11. #11
    Supporting Vendor

    Status
    Offline
    Join Date
    Feb 2010
    Location
    SoCal
    Posts
    69

    Default

    Thanks guys for all of the replies!
    I'll be out of the office until late evening, but if you could include your zip with your PM's I can get a shipping cost on these cores.
    Thanks again!

  12. #12


    1EVILR/T's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Oct 2003
    Location
    Glens falls, NY
    Posts
    2,130

    Default

    As we talked earlier this week I will be ditching my APS in favor of your billet unit! can you use my APS as a core?

  13. #13
    Senior Member

    Status
    Offline
    Join Date
    Jun 2008
    Location
    Virginia
    Posts
    2,527

    Default

    I have a core as well. I've never done business with you and probably won't (although I wish I could afford one of your billet converters because in about two months I'll need something stronger than this P.I. Viper I have), but I know you're a good vendor and have always been for the years that I've been around and I can appreciate that. 22554
    My step mother legitimately thought you could raise boneless chickens.

    edit: she once to her taxes to a taxidermy shop...my hand to god, this woman is a moron

  14. #14
    xbxjunkie's Avatar
    YEAH....it's got a HEMI

    Status
    Offline
    Join Date
    Jan 2009
    Location
    new jersey
    Posts
    212

    Default

    Hey Martin. I'll have a 46RE converter for ya in a few weeks that I don't need, I'll be swapping one of your 28S that I have. In the meantime, I need to buy a valvebody for my '03 Durango AWD. Could you send me a Paypal request to pnawang@gmail.com so you can send me one?
    Last edited by xbxjunkie; 03-17-2011 at 01:43 PM.

  15. #15
    blackknight's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Mar 2009
    Location
    wapato, wa
    Posts
    6,913

    Default

    I have one off my 99, when i got the VB from you and coverter through the fastman, i finally changed it and have it here 98951, lmk?

  16. #16

    Default

    Martin after i get some extra cash, ill be shipping you my trans core and converter,

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •