+ Reply to Thread
Results 1 to 22 of 22

Thread: M Saine Performance Street/Strip Package sale

  1. #1
    Supporting Vendor

    Status
    Offline
    Join Date
    Feb 2010
    Location
    SoCal
    Posts
    69

    Default M Saine Performance Street/Strip Package sale

    Hello all,
    Thought I'd let you forum guys know that I'll be running a Street/Strip transmission deal on this forum for a while.

    The Street/Strip Package consists of:
    Street/Strip 700 46RE - up to 700 flywheel horsepower. (For higher power applications contact me.)
    28S Street/Strip Converter. Very efficient design provides streetable performance and good flash speed -approx 2800- on sticky tires
    Shipping is included.
    Price is $2,250 for the package. (refundable core charge applies). Mention your forum status.

    Feel free to email, call, or PM me if you want details or have any other questions.

    I also offer valvebodies (transbrakes and manual VB's in addition to Street/Strip configurations), converters from mild to wild, racing transmissions, diesel transmissions and converters, etc.

    Give me a call guys,

    Regards,
    Martin Saine
    MSaine Performance
    951-907-0434

  2. #2



    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Corrales, New Mexico
    Posts
    17,966

    Default

    Quote Originally Posted by Saineperf View Post
    Hello all,
    Thought I'd let you forum guys know that I'll be running a Street/Strip transmission deal on this forum for a while.

    The Street/Strip Package consists of:
    Street/Strip 700 46RE - up to 700 flywheel horsepower. (For higher power applications contact me.)
    28S Street/Strip Converter. Very efficient design provides streetable performance and good flash speed -approx 2800- on sticky tires
    Shipping is included.
    Price is $2,250 for the package. (refundable core charge applies). Mention your forum status.

    Feel free to email, call, or PM me if you want details or have any other questions.

    I also offer valvebodies (transbrakes and manual VB's in addition to Street/Strip configurations), converters from mild to wild, racing transmissions, diesel transmissions and converters, etc.

    Give me a call guys,

    Regards,
    Martin Saine
    MSaine Performance
    951-907-0434
    BUMP for an awesome vendor, and a good deal...

    Martin...Is there any diff between a HD 904 and regular 904?
    11.27 @ 118.23
    2017 NM Mopar Challenge Series Champion

  3. #3
    RJ_Hythloday's Avatar
    Complete part out

    Status
    Offline
    Join Date
    Nov 2009
    Location
    Providence, UT
    Posts
    1,085

    Default

    Sweet Deal
    360 ,52mm F&B, M1, EQ heads bronze valve liners, mpp valve train, KRC Custom Ground Cam, Crower 1.7's, PPH midlength, SCT Hemifever tuning, LM-2, 2 1/2" duals

    EQ heads

    Complete part out 99 Durango w/ 5.9


  4. #4
    Wolf360rt's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Mar 2008
    Location
    Peoria, Illinois
    Posts
    233

    Default

    Do you do manual valve bodies for the 46re?
    Derrick (Big D)
    2000 Black Regcab Dakota R/T (14.29 @ 95.77mph) soon to have a Garret Gt42-02 74mm turbo.
    1968 Barracuda Notchback Big Block Turbo E85 project.. S488 88mm Turbo

    my mad ms paint skills

  5. #5



    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Corrales, New Mexico
    Posts
    17,966

    Default

    Quote Originally Posted by Wolf360rt View Post
    Do you do manual valve bodies for the 46re?
    Yes he does...
    11.27 @ 118.23
    2017 NM Mopar Challenge Series Champion

  6. #6
    Supporting Vendor

    Status
    Offline
    Join Date
    Feb 2010
    Location
    SoCal
    Posts
    69

    Default

    The HD 904 you mention might be the 999. This was a 904 with a 5 clutch drum and wider band.

    And yes, I do manual valvebodies and even TransBrakes. Call or email for details.

    Thanks guys,

  7. #7


    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Here & There
    Posts
    3,355

    Default

    Martin,

    What is your e-mail address?

    I'm in Iraq at the moment and phone calls are a bit difficult.

    Thanks
    Tha DakFink: 1999 Solar Yellow R/Three 468cui, W9-RP heads, Twin 76mm Turbos, Powerglide Trans. , Bob's Fab Shop 25.3 SFI Chassis for 10.5W racing .
    (Still in the Fab Shop)

    Hot rodder rule of thumb....every $1 invested in head flow is roughly worth $3 in the short block

  8. #8

    Default

    ive got a 46re valvebody that was done by someone on the west coast and wasnt done right, i was told you done one before the same, hold shifting to 3k at normal drivin and WOT it varies 4800-5200 which is suppose to be 5200 exact, how much would you charge to correct it?
    Brad
    00 CC IB sport 360
    98 RC white sport mildly worked v6, used as a truck!

  9. #9

    Default

    email sent

  10. #10

    Default

    Has anyone heard from him through email recently its been about a week since ive gotten a reply, granted it was a oliday week.

  11. #11
    Supporting Vendor

    Status
    Offline
    Join Date
    Feb 2010
    Location
    SoCal
    Posts
    69

    Default

    As far as I know, I've responded to everybody's emails.
    I just checked and don't have any open emails right now.

    Please re-send any emails I didn't reply to and I'll get back with you.

    Thanks,
    Martin
    msaine1213@aol.com
    951-907-0434

  12. #12
    Supporting Vendor

    Status
    Offline
    Join Date
    Feb 2010
    Location
    SoCal
    Posts
    69

    Default

    P.S. Sorry if I missed anybody!

  13. #13

    Default

    Will do, probably just an internet error, i resent the two i had information in, just let me know if you get. Ill pm you my email add. thanks

    -Chris
    Last edited by 99R/T-Kota; 12-02-2010 at 09:53 AM.

  14. #14

    Default

    From my personal experience Martin's customer service and products are second to none.

  15. #15



    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Corrales, New Mexico
    Posts
    17,966

    Default

    Quote Originally Posted by elliott12@htc.net View Post
    From my personal experience Martin's customer service and products are second to none.
    x2
    11.27 @ 118.23
    2017 NM Mopar Challenge Series Champion

  16. #16

    Default

    i agree with both of you ^

  17. #17

    Default

    email replied

  18. #18
    1FASTASSR/T's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Jan 2008
    Location
    Concord, N.C.
    Posts
    384

    Default

    X3....ditto, Martin is the best!!!!
    Joe Burke
    Concord N.C.
    Blk. 00 CC...sold
    Graphite 02 CC...sold
    R/T less for now!!!

  19. #19

    Default

    how much are the valve bodies?
    2000 Dakota r/t, cc, V-1 vortech supercharger, spintech mid headers, edelbrock heads, comp cam, F&B 58mm throttle body, M-1 intake manifold, vortech air charge cooler, mopar valve covers, cowl hood, roll pan, Flyin Ryan tuned
    2002 Ram 5.9 (thirsty)
    2013 Durango Citadel Hemi- Loaded!
    1998 Durango SLT 5.2 260,000 still going!

  20. #20



    Senior Member

    Status
    Offline
    Join Date
    Feb 2008
    Location
    Corrales, New Mexico
    Posts
    17,966

    Default

    Quote Originally Posted by pacecardrew79 View Post
    how much are the valve bodies?
    He doesn't get on here much...Call him.
    11.27 @ 118.23
    2017 NM Mopar Challenge Series Champion

  21. #21
    Supporting Vendor

    Status
    Offline
    Join Date
    Feb 2010
    Location
    SoCal
    Posts
    69

    Default

    My apologies, trying to get back to forums on occasion, but time constraints being what they are......

    Valvebodies are $275 + shipping + core deposit.

    MSaine Performance
    Martin Saine
    msaine1213@aol.com
    951-907-0434

  22. #22

    Cregger's Avatar
    Senior Member

    Status
    Offline
    Join Date
    Nov 2011
    Location
    Frederick, Md
    Posts
    517

    Default

    MS valve bodies are amazing. Had one on my last rt and gonna get another

+ Reply to Thread

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •