Slammed R/T for the win!!!
Type: Posts; User: 2ndGen360dakota
Slammed R/T for the win!!!
He has a killer shop with one of about everything you could think of. The satellite came out of a field in West Texas and is a beautiful car.
The truck weighs 7500 lbs and it hauls ass for that weight. Steve is one of the coolest guys on earth and a good friend of mine, He is a plumbing contractor and the dually was his fist company truck....
Thanks, It has exceeded every expectation we had for it and I hope for bottom 12s on motor when cool weather gets here.
We did the FI to carb swap several years ago on my Gen1 dakota. With the stock long block,Pro Products Crosswind "air gap wanna be" intake and a ebay 650 D/P carb it went 13.70 and I cant remember...
SOLD!!! Thanks for the ad!!!
Several of the 1/8 mile tracks in the south are shorter than 660 ft.
My buddys 95 super gas 95 camaro off the stop runs high 8s low 9s at about 155mph with a 1000hp 555 in it. That dude must be retarded. :jester:
update
Part number P4876062 time 120.00 shipped lower 48
install height 1.64
O.D. 1.42
wire diameter 0.187
lift range 0.480 / .0600
Retainer part # to be used p4452035...
Cool...........Let it eat
I would invest in a edelbrock progressive set up and you can manage that much spray. I have a digital 6 that takes out up to 10 degrees when I spray so I dont have to mess with the timing. I hit mine...
A little trick I have used to get by the tech nazis is to put no time on the window. I have made several 10 sec runs here at Gainesville Raceway under the radar. ...
Patrick Gainesville 32605
http://i909.photobucket.com/albums/ac293/mphsmitch/kelstruck2-1.jpg
After looking at my digital 6 box its 5 degrees I have pulled out for a 125 shot. I have all the respect in the world for you guys that are doing it with the factory fuel injection set up because its...
I would suggest that you plan to spay a large amount of nitrous you talk to an expert on the tune like Steve Johnson or Monte Smith. Steve can be reached through yellowbullet.com and monte can be...
I see that your from Fl and if you can get him to come to Gainesville I would be happy to crack him for ya.
I have a 360 magnum in my 90 dakota RC and I had my plugs gapped at .040 with a 125 shot and 4 degrees of timing pulled out on a msd digital 6 box. I pulled the plugs the other day and I burned a...
The speed shop that I work part time for charges $59.00 for 2 pulls with a wideband o2 hooked up.
I would go with a 1st gen because of the weight difference and the over all cost.
http://www.racingjunk.com/category/28/Race_Trucks/post/1462544/88-dodge-dakota-roller-smallblockchevy-setup.html
I would have to say this is almost as good as the Eddie Miller threads on moparts.:jester:
I plan to put on a few things that I have been able to get for my dakota.
R/T heads that will be ported a little
380 hp create motor cam
I plan on buying
275/60/15 drag radials if I can find...
I got a great deal on a set too and I cant wait to be able to get them on my junk. :rockwoot:
I was able to go to test and tune last night and make a few 1/8 mile passes and I cut a .000 light the first pass. It is the 4th time I have done it but it has been over 10 years and the other three...
My buddy flew up to Baltimore and drove the truck home and it is a really nice truck. There is an issue with the paint on the hood and the roof but everything else is in very good condition. He is...