Search:

Type: Posts; User: THEhomelessONE

Search: Search took 0.00 seconds.

  1. Experience with Hughes 5007/Topline A-2269RE fast bleeed variable duration lifters?

    I asked Hughes and they recommend around 0.080" preload, just heard back from Topline and they recommend 0.020-0.040. I ordered pushrods around 0.060". If I went up or down in pushrod length I'd...
  2. Thanks! Ideally would have a twin screw tvs on...

    Thanks! Ideally would have a twin screw tvs on the stock 360 but there's no kits available.
  3. I was thinking of spinning higher because the...

    I was thinking of spinning higher because the gearing advantage. How little hondas can be so quick compared to other 4 cyl cars with similar weight and hp but at a lower rpm. I hate how tall the...
  4. Yup .331" lobe for the 1.7's. Builder told me I'd...

    Yup .331" lobe for the 1.7's. Builder told me I'd be fine with that lift and duration on a stock bottom end plus what I've been able to find online. Axles/gears done the right way with a dynatrac...
  5. High torque 408 cam recommendations? M1 4bbl vs AirGap?

    Jeep weighs 5k lbs with tall gearing. Stuck using a single 3" exhaust with a cat. I'd like to shift at 6k and run a low stall or a really tight higher stall. I always thought the AirGap was too...
Results 1 to 5 of 5