http://philadelphia.craigslist.org/wto/5425355286.html
4x 235/70/15 firestone winterforce snow tires with 6-7/32nds on outside and 5-6/32nds on inside. Realistically these only have 1-2 more...
Type: Posts; User: Five9Dak
http://philadelphia.craigslist.org/wto/5425355286.html
4x 235/70/15 firestone winterforce snow tires with 6-7/32nds on outside and 5-6/32nds on inside. Realistically these only have 1-2 more...
Yeah mine skips the inside tire on a tight turn, sometimes even with no or very little throttle.
Did you have the valve body out? If so the park rod may have been improperly installed.
In my experience, you have to actually have a tire off the ground for it to behave like it's open. Similar experiences in the offroad crowd for who it was originally designed.
For me, that is the...
You better get that converter to a shop to check out, and check the flexplate for straightness after that ATV episode... jesus.
My interpretation- The timing he had in them from the street tune was only 1* off from the best they verified with the dyno.
I use an LPW cover with cap supports. You will have more traction anytime you aren't going straight compared to a stock LSD in good working order.
Nice work. I want to see more pictures of the wiring power/relay board. Looking forward to seeing how the AIM dash works for you. I will probably follow you on that, try to document any problems you...
It's pulling off in second gear then downshifting to first as you roll out.
It could be slightly overheating, or you have a gov pressure problem. There is a transgo fix for this but it requires...
I've seen three different bypass valve assemblies that shipped with the dodge kit. They are all bolt in compatible but slightly different.
Well I did have the pick of the litter.... hah.
What is replacing it?
Amanda and I will be arriving at the track on Saturday morning. We got a hotel at the discounted rate for Saturday night. Looking forward to seeing everyone!
Every kenne bell / autorotor 2.2 compressor will work. The earlier kits came with autorotor compressors, PN MX422. The later kits were white label autorotors made for Kenne Bell called the "TS...
What is the weight savings?
ATF 4 in my 727, its good stuff. If it conforms to the ATF 4 standard it is group III synthetic and has the appropriate additives. All brands will be nearly the same or identical. I usually use...
http://i14.photobucket.com/albums/a319/black99rt/IMG_20140712_0926551_zpsd45955ca.jpg
http://i14.photobucket.com/albums/a319/black99rt/IMG_20140712_0926481_zps31d87ace.jpg
Boyd Coddington...
Shooting for production by the end of the year.
The video will be released before then.
The kit will include (subject to change)
Air filter
Inlet tube
SRT-10 style 70mm BBK throttle body...
The sensor block casting on the valve body is different between the new and old electronics. You will need to locate that part to use a newer style valve body in a 98/99 truck. (along with the early...
The 422 is a 2.2L compressor. It is generally out of breath at 6-650 wheel hp. With a large motor and excellent heads you might be able to stretch this a bit.
Don't spin it faster than 19k rpm.
...
Don't have a date preference, I'll probably come down to spectate / hangout. The truck is not currently on the road, let alone race ready.
Can I put 03 durango calipers on 03 dakota spindles?
If you want to run MS for the engine, just leave JTEC for the gauges and transmission. You don't need to do anything special. If you want to modify the shift points it can be done with PCM tune file...
I put SVT suspension on the wife's focus..... hah.
Nobody has ever asked for my license at a drag strip.