Yea you want to remove the riveted stockers and replace with aftermarket bump stops. The best ones I have used so far are Belltech 4923, They are cushiony for a decent ride even when hitting bumps. ...
Type: Posts; User: daninsac
Yea you want to remove the riveted stockers and replace with aftermarket bump stops. The best ones I have used so far are Belltech 4923, They are cushiony for a decent ride even when hitting bumps. ...
So I did the 2003 durango brake upgrade and had it aligned at a great shop and they found the sway bar was mounted a little more to the driver side then the passenger side.They loosened the bushing...
Who tuned it? I got a original mopar performance ecu on my 2000. wish I could see a stock 2000 r/t ecu to compare.
Counter clockwise, its easy if you follow this guys directions. I use a big ass crescent wrench bought cheap from harbor freight. Takes quite a few wacks sometimes but eventually it gives!
...
I run a 180 thermostat, the credits on the mpvi2 are universal. The nice thing is our trucks only take 1 credit so I still have 8 left.
So ever since I replaced the upper and lower ball joints and the lower control arm bushings about 2 years ago (I did the upper control arm bushings 7 years ago) I get this scrapping sound when I hit...
I got a brand new MPVI2 with 9 credits for a little over $500 I found it on walmart dot com. It arrived in a sealed shelf worn package so looked to be new old stock.
I figured if I tune enough...
Got my fan turning on at 185! best mod so far getting rid of the clutch fan for good!
I found and bought a new MPVI2 with 9 credits for $570 with tax. Alot of $ to just turn on the fan earlier but im sure it will come in handy if I ever do a cam swap or other stuff and I have credits...
It would just be so much easier with the ecu controlling it and I want to keep it stockish looking under the hood. I even retained my stock 2000 fan shroud everone hates.
But... If I do go with a...
Ouch so over 700 with tax. I guess Ill wait and see if there going to make the newest one compatible and just run my a/c all the time in the meantime.
So I was planning on using hptuners to change the fan temp so I was waiting to purchase the new version of hptuners then come to find out there is no support for our ecu and now they wont sale the...
Have fun fixing her up. The previous owner obviously did no maintence but its worth it especially doing it yourself.
It just unsnaps, gently pull the REAR panel off your cab (the backside of the seats. Start from the top plastic corner and gently pull from left to right (or right to left does not mater)
So I know its one of these but not sure what, I am guessing it is one of the wiper styles?
https://www.mcmaster.com/edge-seals/
I am about to permanently (have to have it on in the 7 month summer of california) rid myself of the clutch fan and replace my factory 2000 electric fan with the GC fan.
I will utilize my stock 2...
I finally got a Reflexxions steel hood. Wouldn't you know it days after my last post of not finding anything on craigslist there it was on craigslist. Had to drive to san jose, 130 miles to get it...
yea i live in California and do not see anyone selling anything for these Dakotas anymore. Have better luck trying to find one in a pick and pull wrecking yard. I found a fiberglass hood that was...
I would like to find the following located somewhat close to me, Sacramento CA.
Steel cowl induction hood
Hughes or M1 fuel injected manifold
good headers (california legal)
B&M floor shifter...
1. remove rail at bottom of door by pulling it up.
2. remove back panel by pulling it off, it just snaps in.
3. remove 1 or 2 phillips screws from back of cab holding panel on. (Can't rem how...
This is why I am doing most of the pre paint work on my own. I found the rear of my bed needs re welded. I think the body shop would've missed it!
yea I saw someone using that technique to weld 22 gauge sheet with the same cheap flux core welder I have on youtube. That is how I would do it.
No welders will weld on the bed of my truck, they...
So I think I know how this happen now after thinking about it.
My neighbor at my old house about 13 years ago ran into that rear part of the bed when he was probably making a u turn. I know it was...
So I was installing a rollpan and noticed movement of the passenger side bedside and found where it looks like it should be spot welded I have total separation in the rear where tailgate is.
I...
i do that to a-holes that cut me off after i get in front of them at a light! LOL