16476
Just had to dress up that grill with some badging that should have come standard on these trucks!
Just saying!
Type: Posts; User: Elvbo
16476
Just had to dress up that grill with some badging that should have come standard on these trucks!
Just saying!
Thanks BigRob, what my trick that I've used in the past! Was unscrew the rear 02 and zip tie to the frame and put a bing plug in its place! Works well no issues! Luckily so far No stupid emissions...
Fortunately we do not have that illegal and corrupt emissions testing yet! They tried twenty five years ago! And we were fortunate to have Governor Ventura shut it down, because the state was...
Well finally it turns out to be a clogged catalytic! What a ritual! Now the next challenge is the fact this 1999 Dakota RT is a Canadian built truck! So the catalytic is a dual inlet single outlet!...
Thanks for the reply, I never had any exhaust issues! It starts just fine but I'm at a crawl with it. As so as you try to Give it trottle it just bogs down, and I'm leaning towards throttle position...
Help!!!! So I'm coming off the highway, and I've lost power and is making a bogging sound if I step on the gas! Any ideas would much be appreciated. My OBII is not pulling any codes.
Had a great weekend last week in Minnesota for Mopars in the Park. Hotter than Haties but a great venue, lots of cool and rate Mopars. I was one of only four R/T Dakota's floating around. And I took...
After replacing the ABS sensor on the Diff it was fine, but after driving awhile I came across ba more serious issue! It turns out that my Diff was shot! And as the repair guy says, it's about to...
My second attempt to post this ! My ABS and Brake light comes on after heavy to moderate acceleration? It does reset after I stop the engine and start the engine. Any Idea as to what would cause this...
Hello my fellow Dakota RTers, last summer I supposedly had the tranny tuned up with a full service solonoid fixed and bands tightened, I was told that the screen was pretty filthy possibly from the...
Another option is to check out Boosted Motorsports Dakota on you tube He is into episode 39 on a Hellcat swap from a salvaged Charger, with only 12,000 on the motor. Holly has done a great job in...
Help!! Once I disconnected the daytime lights! I can't seem to find the forum to bypass to keep the backup lights functional. Any help would be appreciated.
Let's try to show a pic. 15733
Thanks here's another side pic.15732
Well today was 7 hours of clay cutting and buffing, using Griot's polishing process! And let me tell you for a 21 year old paint it turned out fantastic! It's alot of work to clay and then use there...
Hello fellow RT ers! Been a member since 2009 and have enjoyed this club to fullest with so much enthusiasm! I'm enjoying my new project 1999 RT Zero rust. But I need space at the homestead! So if...
Hello fellow RT ers! Say I need some info on how do I receive my renewal decal and T shirt? I have not received any response! Any help would be appreciated.
With the modded kegger installed, and adjusting the TV cable, which I remember the last time I did this was 12 or 13 clicks from the front! And has been running great! I still need to run a high flow...
Lol oops, I was typing after I had installed the plugs, and once again I cut my finger on manifold heat shield! I'm wondering how many owners out there have either severed an artery or lost a digit...
And to top off the engine, I had some 6588 plugs to go with it today!15637
Intake installed! Whew what a job. Runs way better here's a pic.15635
So here's is the final assembly! Ugh! Hughes gives you the tinyest tube of RTV! Barely made both sides! Here! Here's a pic.15626
Today I finished up the mods on the Barrel Intake, Takes awhile with a Dremel! But it turned out good. So hopefully the weather will be warmer Saturday, but we have rain and possibly Snow. Here some...
Finally a decent day here in MN! Here are some pics of my 1999 R/T. It's in great shape. No Rust.15607 15608
My first attempt was futile, due to having the wrong cutting wheels for my Dremel! I was tempted to bring it to my work and use a Bridgeport and a nice 1/4 " four flute endmill and make my life...