Hey musky Mike I think that cam will be fine, I just put a 528i-536ex on 1.6 rockers but I used 1.7 rockers that pushed it up to 561-575 with no problems on clearance but definitely needed a tune
Type: Posts; User: pat d
Hey musky Mike I think that cam will be fine, I just put a 528i-536ex on 1.6 rockers but I used 1.7 rockers that pushed it up to 561-575 with no problems on clearance but definitely needed a tune
Thanks for input guys I’m leaning toward the 408 I already have heads from pie headers and intake cam ect but I keep getting tempted with that damn hemi they are getting cheaper just the fab with to...
Hey guys need a opinion and I know everyone has one !! I possibly spun a rod or 2 and I’m trying to figure out what my next step is just put iron heads by (pie) new cam and a tune by (Ryan FRP)...
It was base of 1.6 but had specs for both I had 1.7s on the truck already with stock cam and heads air gap fi intake headers and a can tune she would burn the tires down with a little power braking...
Hey guys just did heads cam lifters have custom grind from comp 1.7 rr FRP tune on HP tunes Ryan got this thing on point but definitely knocked some of the bottom off it stock converter is probably...
That’s next on my list Hemi swap will be waiting for this please detail everything I need a exact breakdown so can start collecting parts my wife thinks I’m crazy
Not all today but over the last couple of months swapped heads cam lifters a new tune (thanks FRP) and a midnight express sticker. Broke the water pump on a full throttle run down the street before...
Use Ryan he Will definitely set you up with the best tune canned or custom just finished up my tune with him last month big difference already but haven’t had a chance to really jump on it yet had a...
Hey spawn x did you call the guy at Pie they usually answer the phone and they will call you back if you leave a message I bought my cylinder heads from them and they turned out really nice
Hey spawn x I went down this same rabbit hole you have to get on the phone and start calling them @9am or 8:55 Monday it usually the worst because everything happens on the weekends had to wait for...
Thanks Mike hopefully tonight will have intake off
Does anyone have these parts in a package all together don’t know which one to order off Amazon open for suggestions as for Hemi swap magnums are ending where hemi’s are starting I can get a 5.7...
Not downshifting and sometimes starting out in 3/4 gear hopefully it just governor/pressure switch if the tranny goes I’m gonna do a hemi swap I’m tired of all the dollars for subpar performance
Try pie or Hughes my iron eq’s came from pie and looked really good I’m sure aluminum would be easier and look great
Finally got the truck tune big shout out to Ryan (FRP) had big time problems with sct I’m probably the only one 10hrs on ph and computer only to find out nothing Ryan hooked me up with a local guy...
Well I went with bell tech springs for a v8 I did not cut the metal bump stops off control arms even when I had stock springs in it would bottom out just curious to know what shocks everyone is...
Hey guys looking for shock absorbers for front and rear of truck front is dropped 1 inch from stock and this thing is bottoming out over everything are there heavy duty shocks for front ??
Yes tried that and I don’t think it helped going to try it a couple of times and then wait to get a hold of Ryan and see if tune will fix it right now it hangs and then goes low after stopping I...
Thanks Mike I have to find someone else with a scanner to do it myself the guy borrowed one from somebody but after driving it it has kinda tuned itself but idle still drops to 500rpms when coming to...
Thank for the response my guy to supposedly set it +3+4 I didn’t see him actually do it so I say supposedly so the truck runs ok but I’m getting a backfire and a small popping noise when accelerating...
Don’t have any scanners trying to find the snap on mt2500 any other scanner’s work and what should I set it to when I can
Hey guys don’t know if I’m in right section but what do I set my fuel sync to added heads from Hughes and a cam with 1.7 rockers lift is 561/570 -218/224 duration 114center
My truck have red decals and it’s a 2000 I waiting on a new sticker to say midnight express for back tailgate
Truck looks good were did you get the stickers
Bought the EQ’s with 2.02s they look great haven’t installed them yet they did take longer than I wanted