By the way, your inbox is full.
Type: Posts; User: JonRT
By the way, your inbox is full.
Funny that I took apart some 03/04 spindles and mocked up the calipers today to do this set up. Sign me up for a kit.
How's this coming along, any more progress made on the fronts?
I haven't been able to figure that out yet. I won't be doing the swap until the spring. Gerko said he can provide an adapter block to get the angle correct and suggested using a B-body lever, but I...
That would be very helpful, thank you.
Thanks, the reason I asked was my A/F gauge is mounted there and was worried that 5th or reverse might be an issue with that. It might work, but I am going to switch the gauge over to the A pillar...
I bought a few things from Gerko a couple months ago including a flywheel. He seemed busy but was pretty responsive to me by email. Tom, I believe Geoff asked you a question about the shifter lever...
So I have been toying with the idea of manual swapping my Dakota. I've read through the write up on the T56 swap (very helpful) but I'd like to try to get a Tremec Magnum to work instead. I think I...
Awesome, thank you.
I'm going to be installing the 1.7 non-adjustable rockers sometime soon however I don't think the pavements sucks install article is still on their site. Anyone have this write up saved or another...
I decided that I'm taking the heads off. I found an engine rebuilder that can get the broken bolt out of the head and once I've got him some pictures of the cylinders, he can tell me what's damaged....
I'm in northern Mass.
I have plenty of PB but these things are seriously rusty.
Forgive my ignorance, but how hard is it to pull the covers and do I need to buy any sort of new gaskets or any special considerations? The nuts holding the covers on look rusty as hell, think...
Well boy do I have an update...
So I could not get the broken manifold bolt out and after some consideration, I decided that it wasn't necessary to fix it. There isn't a lot of pressure on it or...
So I decided to start working on my engine, simple stuff like intake manifold, throttle body, valve spring, and rocker arm upgrades. Well pretty much right out of the gate it has gone to hell. While...
Haven't seen any pictures of it but has anyone successfully squeezed these into a RC?
Do you know if they're sold on their site or do I need to contact them? I'm having a hard time trying to find a bushing rebuild kit for a dakota on their site. I can find other sites that seem...
Bought a used Hotchkis sway set, everything looks fine on it but the rear end link needs a new bushing. Sad to see Hotchkis discontinuing one of the best upgrades for our trucks. So does anyone have...
pm sent
Is this for lowered or stock height? And is the kit 100% all parts included?
Well good news is I now have a new transmission. Bad news is I had to buy a new transmission.
The fluid is fine, right level, right color, no smell. I'm assuming the transmission hasn't been changed so 112k miles on it. The metallic sound when putting into drive or reverse is hard to describe...
I really need some help, I don't know much about transmissions but I know well enough to sense something is wrong. Recently my transmission has not been up shifting into second at the right time....
As far as subs go I have this one behind the drivers seat in a homemade mdf sub box and it hits pretty hard. Most people only go up to 10 inch subs but I don't like anything below 12. This is a...