any spec on springs ?
Type: Posts; User: Tobbe1
any spec on springs ?
thanks !
new best 1.628 14498
i run ecumaster EMU / engine , oem Ecu still run intrument cluster and transmission (ecumaster dont support transmission)
http://www.ecumaster.com/
a friend runs a new hemi and a 42re / maxxecu...
cool to see one more European RT , good luck whit your build ! :biggthumpup:
one nice partslist
if you run 1 turbo i should leave oem sensors where they are and run the wb at the downpipe ,
wb for tuning /reading and oem for cruise afr
my truck have 3 narrowband stock , i use a wideband in front of catconverter , rest is oem ( left/right bank)
i have run a lc-1 innovate ,thats simulates a narrowband signal into the oem ecu
have one of his cams in my mopar BB , have emailed him a few time in the past getting good info , sad if he past away ..
got it from craiglist /Beaumont/Perris CA sellers name was Jeff , his dad should got this new ...dont now if thats true :jester:
99dart nope no 360 magnums , would be to expensive...
the tuner at psimotor spend a few hours in the rollers to get this numbers ,first session i was running out of fuel /walbro 255 /msd voltagebooster (injector duty cycle 100% upgraded to a walbro 450...
cometics /studs now ,felpro 1008 dont work
take the hp numbers whit a grain of salt , dynos are not the same this is calculated to engine numbers ,
will ad pics
imported this 1999 from CA to Sweden in 2011 ,had a prochargerkit from a ram and from there it got expensive
its been a long road , blown headgaskets ,etc
now its a magnum 410cui
rhs heads...
if you go to my FB page ,there is a lot info/pics there i will make a built tread :drive:
https://www.facebook.com/Taracing70/videos/1048138538635880/
https://www.facebook.com/Taracing70/videos/1047360572047010/
410cui Magnum / Procharger d1sc aprox 14psi Ecumaster emu
http://www.psimotor.se/
https://www.facebook.com/Taracing70/
http://ecumaster.com/en/
http://www.dynomet.dk/en_whoarewe.htm
cool have a 95 plain jane 4cyl 5speed here to , trying to have it registered and pass Swedish dot .(florida truck)
you looks better in green :biggthumpup:
Mopar P/N 04318035 Spray Gasket Sealant , used on mls gaskets
Hi a friend have a 5.7 hemi and a 44re transmission , running standalone on engine and TRANSMISSION !
he have it in a ratrod going 7.3X 1/8
i feel that this is a braketrue in running mopar RE...
cool done ! :biggthumpup:
cool :biggthumpup: i have my own 46re 3speed conversion still on transmissionstand in my shop , i´m not the onlyone having this ides.
would be fun follow beta testing ;)
Hi any progress ? (got ok from Swedish DOT to registered mine here in Sweden but needs to pass inspection first ... )
hard to se spec .... ;)
converter porn :) free bump!