I mean you do know that the center T stat only makes you chop off the rear bolt hole of the AC. its not a total loss. the AC compressor can be help on with 3 bolts and be just fine
Type: Posts; User: 99lowdakota
I mean you do know that the center T stat only makes you chop off the rear bolt hole of the AC. its not a total loss. the AC compressor can be help on with 3 bolts and be just fine
Most the time people use a MSD box like the 6AL to pull timing for N2o.
haha. me either Niebs. I am waiting on a tube bender as well. I just need for TIG practice as i need to get better with travel speed. i like to stay in one place and dab a lot so it looks like im...
Normally yes a bigger intake duration is better as you can cram more air in. But it wouldnt kill that truck where you stand now. Is there a better cam; yes, but you can always change it later if you...
yes turbo runs better at a higher duration like 112-114. if you are at 112 you would be just fine on turbo. And as far as tuning goes FRP AKA Ryan can tune anything and everything just fine without...
yeah just have to watch they are not trying to sell you an air hat that has injectors in it. That is old school and now FRP can tune the truck without that. best is to fine a used one. Also if you...
If you can fab up your own hot side that just reduces the cost even further. but the easiest way to do it is to buy to driver side headers and run the driver header in a big U shape back into the...
Just go to a Turbo. its cheaper and makes more juice.
I think a nice tune will do you good. If you want a SC dont use a torque storm they do not produce enough CFM to feed a magnum. A good one is a Vortech V3. Also if you go to a SC you will need a...
I may or may not have at set im getting rid of. What are you looking to pay for such package?
Ill get your heads and your Qa1's. Email me. Mathewloewe@gmail.com
DO NOT CUT THE STUD. If you call ARP they will send you a bolt free of charge. I actually called and got them to change the kit like a year ago. And Huges also includes the bolt with there girdle kit...
I visited there while they were working on it. They had just dug the foundation for it and were pouring concrete. but i have seen pictures and did a 12th grade report for it before i went and...
if i were you i would just wait till you are ready to cam swap as well. spend less money and just do both. and if you cam swap those 1.7s are going to be useless. you want 1.6 for less valve train...
You want the Viper spares for Drag wheels in front if thats your idea. otherwise call bogart and order a set.
I can tell you this much. if that is a fiberglass scoop you will never get it to no start cracking where you blend it into the metal hood. it is due to the fact the hood gets hot and expands and...
best way is to relocate it somewhere in the wiper cowl and loop the lines into each other with a T fitting to Vac. The only thing the computer reads if the valve iirc.
however to answer your question yes the stock regulator will control the added fuel. But for how long idk and how efficiently idk. if you are planning over 300lph i would just get an aftermarket...
If you add anything over a 300lph pump the stock wiring will not be enough to power it. you have to put a new harness to the pump. Easiest way to modify the basket is to buy Hypotek's basket bracket....
Hopefully it is a 8-9s 1/4 truck. hoping it makes something like 900whp and i can get the truck down to 3500#s with me in it. but we will see
https://hosting.photobucket.com/images/i/Mathewloewe/118718010_320884409120314_5249978599337685273_n.jpg?width=1920&height=1080&fit=bounds
Got the push rods and rockers on. now to do some modding...
i mean for most your truck is worth a shit load. Not everyone has the ability to all that them selfs. That is why i ask you a lot of dumb questions :roflmao:
100%. I just think its crazy how long some of these places stick around. not to mention how some have fallen off the wagon and now have come back and already screwed people again.
LOL. Hope you get it all ok. I would inspect very well
Man a month of no updates is a bit much. Like I just had a shop the other day put together a whole short block for me. Cleaned it and decked with line hone and took him a week. If porting a set of...