1 Attachment(s)
Opinions on this camshaft please
Anyone care to share thoughts or opinions on my camshaft choice of the Comp Cams 20-604-9 before I pull the trigger?
This will be going into my mild 408 build. Mild because it is a street truck only, engine being built more as a torque monster / stump puller than a high revving screamer.
408 with a target compression ratio around 10:1 (No plans for boost but you fuckers will try and talk me into it and I might cave in later)
Aluminum 2.02 valve eddies
1.7:1 roller rocker arms.
Airgap Fi intake (whatever, haters gonna hate) because I want the torque down low. If it causes asthma I’ll swap to an M1 4bbl.
Spintech mids and dual 3” open exhaust, no kitty cats.
Stock stall converter, but might try one of the Martin Saine 2800’s
Leaving the stock 3.92 gears in the rear.
Will be tuned by Flyin Ryan.
http://www.compcams.com/Company/CC/c...?csid=664&sb=2
Attachment 13740