PDA

View Full Version : M-1 intake



Lowdown
03-19-2008, 01:33 PM
I have a 99 Dakota R/T CC, that I just bought, I am trying to mod the motor, I am looking for a M-1 intake. Any suggestions where I can buy one and what a good price to pay for one.

Thanks for the help guys!

Jamie Black R/T
03-19-2008, 02:20 PM
ebay!!

i have seen two 2bbl M1's go for under 300 bucks on there the last week

blaindsmith
03-19-2008, 03:44 PM
If you want the cheapest brand new one this is the cheapest I could find.

http://www.monicattichrysler.com/comersus/store/comersus_viewItem.asp?idProduct=1344

Danno
03-19-2008, 03:57 PM
If you want the cheapest brand new one this is the cheapest I could find.

http://www.monicattichrysler.com/comersus/store/comersus_viewItem.asp?idProduct=1344

Funny that,

I sell em cheaper than that even.

$471.90 for new ones.

Danno

WeezyRT
03-19-2008, 04:02 PM
Funny that,

I sell em cheaper than that even.

$471.90 for new ones.

Danno

Hey Danno, I sent you a PM a couple days ago about a 4bbl. Just wondering if you got it or not?

Lowdown
03-19-2008, 08:49 PM
Thanks.

Lowdown
03-19-2008, 08:51 PM
Do we need Egr or None EGR? The truck is stock and I and going to mod the motor with a cam and tune but the emission laws here in texas are pretty rough.

blaindsmith
03-19-2008, 09:10 PM
Do we need Egr or None EGR? The truck is stock and I and going to mod the motor with a cam and tune but the emission laws here in texas are pretty rough.
You need a non-EGR. 99-03 R/T's do not have an EGR on the stock manifold.

BTLFED R/T
03-19-2008, 09:48 PM
You can use either intake. Just plug the hole in the center of the EGR intake with a bolt or turtle.

emwhiteR/T
03-19-2008, 11:04 PM
Do we need Egr or None EGR? The truck is stock and I and going to mod the motor with a cam and tune but the emission laws here in texas are pretty rough.

The Texas emission laws are a joke compared to other cities...My truck passed and nothing was even said about it. As long as you throw no CEL's, then you are fine.

I am running a M1 with the EGR. I blocked it off with the provided accessories from the Install Kit.

txlen
03-20-2008, 03:43 AM
ebay!!

i have seen two 2bbl M1's go for under 300 bucks on there the last week


i look on there all the time and don't see any!!...what do ya search for????

Danno
03-20-2008, 03:40 PM
Hey Danno, I sent you a PM a couple days ago about a 4bbl. Just wondering if you got it or not?

I dont check my PM's here. Dont have time. If you want to get ahold of me directly email me at

dbennett@bremertondodge.com

Danno