Side Skirt Availability

[ME111]

Below no longer applies. Contact me via PM or email should you want a set unless there is a Group Buy in progress.

DETAILS
GenIII Dakota Club Cabs, Reg Cabs, and Quad Cabs all of which could be with or without flares. Material used is that of durable urethane. Pics from those already sold are pending my receipt of them.

GenI and II models could also be made available but I would need to have at least 10 seriously interested before I commit to those.


Gaurantees and Warranties
1. Workmanship. If you feel that what you were sent is not up to par, just let me know within the first 30 days of receipt and I'll make it right.

2. One year free replacement of a damaged beyond use piece up to two pieces. The clock starts after the first 30 days of receipt ends. If anything, it'll be the cab pieces most likely. So if you lowride over a speedbump at 40mph or offroad through some nasty terrain..you're covered. All I ask is that you send me the damaged piece(s) first.


PRICING
The price for any uncolored set will be $300.00 shipped to the continental U.S. and $320.00 shipped to Canada.

Color Option
If you would like to have your set made with color, add another $35.00. This is NOT paint but actual color added to the urethane mixture before pouring.
Without color being added, the sets are White but I reserve the right to include pieces of other colors unless you specify a color. To do a set in White is at no additional charge but you must specify this color when ordering.

I can do the following colors besides White: Black, Brown, Yellow, Purple, Green, Orange, Red and Blue. They are not Paint Code specific to your vehicle so do not rely upon this to replace possible painting needs. Coloring should be considered as an undercoating to your paint in the event your paint is scuffed or scratched it should not be that noticeable. Should I feel the coloring is not up to par before shipping, I will refund you the $35.00.

Ordering
Be sure to provide Year, Make, Model, Color and whether you have flares or not.

Payments with your order must be made in full and may be sent via PayPal to jamesmess@verizon.net or via USPS MO only to:

James Messerschmidt
PO Box 181
Triangle, VA 22172

CONTACT INFO
My email addy is jamesmess@verizon.net and my cell# is 703-303-8570 if you need to reach me for any reason outside this forum.

[BillMopar]

damnit man i wanna set really bad but im moving wed so i dont have the cash to burn but maybe when i get settled in i just hope you still make them by then

[ME111]

damnit man i wanna set really bad but im moving wed so i dont have the cash to burn but maybe when i get settled in i just hope you still make them by then

No worries...I'll be making these for the foreseeable future.

[BillMopar]

No worries...I'll be making these for the foreseeable future.

alright kool casue i have the money for them right now just gotta get were im goin first and still have the money then ill put my order in

[KENNE BELL RT]

Will You Ship To Canada If Yes I Will Take A Set For A 99 Rc Rt With Flares. Thanks Dave Quinn

[ME111]

Will You Ship To Canada If Yes I Will Take A Set For A 99 Rc Rt With Flares. Thanks Dave Quinn

It'll be the first set shipped there but I don't see why not. Shoot me a PM with your address and I'll look into the cost of shipping.

[AMF#1]

HI, So you are back to producing these. Thought I had read you where having mold problems and/or going to make them out of another material???
If you are making them I'd take a set for a CC with flares. Let me know...and I'll paypal you. Thanks, Mike

[ME111]

HI, So you are back to producing these. Thought I had read you where having mold problems and/or going to make them out of another material???
If you are making them I'd take a set for a CC with flares. Let me know...and I'll paypal you. Thanks, Mike

All issues have been addressed and all paid orders have been shipped and received. Some have even had them painted and installed with pics posted within a thread on the Dak-Dur site. Here's a link to it's last current page: http://www.dakota-durango.com/forum/showthread.php?t=107761&page=23

I'll update this thread or just start a fresh one with the latest offerings today. Please wait to order until then.

[ME111]

First post updated with revised options and pricing.

[mutedduck]

I'd like a set for a cc with flares...You should advertise on ebay if you haven't already!!!!

[ME111]

I'd like a set for a cc with flares...You should advertise on ebay if you haven't already!!!!

I'll be looking forward to your order. Right now, word of mouth and these sites is sufficient. If I got hit with too many orders right now, I'd have to commit to expanding..employees, an actual shop, a cute young secretary:D, etc. Not quite ready for that unfortunately.

[holic_77]

I saw these in person at the nats and I must say they really looked great. I think Dave and Chris had the GISM ones installed but still the look is amazing. How soon would you think an order would be ready for a CC? I just want to give you a heads up before I send payment.

[ME111]

Well first of all...THANKS for the cudos! I don't know who's set you saw but I'm sure the design has progressed since then and by that I mean they should be an even better fit and finish. I have 4 sets ahead of any future order right now which I was just working on with a new batch of urethane. Typically, one should expect about a month but I had to do a recall on the last batch which I'm correcting now. Anyway, I'd still like to say a month lead time after payment is still about right so as to not raise expectations too much. I'm still making them better as I go, and will do whatever it takes to make you guys happy with what you get/got no matter what.

I do still have the original set of skirts of Todd's skirt design that I made the original molds from and to be honest they are getting in my way. I don't need them anymore and so if you want, I'll sell them to you or whoever for 150 shipped but with NO warranty. I can ship these within a day or two after payment. They were never installed but included with my used '99 R/T which started all this.

Sorry for the long-windedness...Jim

[sunike32]

I saw these in person at the nats and I must say they really looked great. I think Dave and Chris had the GISM ones installed but still the look is amazing. How soon would you think an order would be ready for a CC? I just want to give you a heads up before I send payment.

Whose truck had them at Nats? I forgot to make notice...I wanted to check some out in person, doh. Mine are one of Todd's kits, BTW.

[holic_77]

Whose truck had them at Nats? I forgot to make notice...I wanted to check some out in person, doh. Mine are one of Todd's kits, BTW.

David Salazar (ADakotaRTGuy) and Chris Redmond (NH TAZ)

I didn't notice yours because that cowl had all my attention :biggthumpup:

[sunike32]

David Salazar (ADakotaRTGuy) and Chris Redmond (NH TAZ)

I didn't notice yours because that cowl had all my attention :biggthumpup:

Redmond's are either GSM's or Todd's skirts. Not sure about David's...?

Haha thanks. Did you get yourself one of those cowls yet?

[2k1AmberR/T]

Todd/RT Mods/GSM are all the same FWIW. Same manufacturer just sold under different names. Jim's being an improved design and material only add to the fact that he is the only current source for these bad boys.

[sunike32]

Todd/RT Mods/GSM are all the same FWIW. Same manufacturer just sold under different names. Jim's being an improved design and material only add to the fact that he is the only current source for these bad boys.

Not the same manufacturer as far as I know...I thought Todd just had the molds and had someone else making them. Regardless, they're the same damn skirts. But I know Chris' are the fiberglass ones; not sure about David's.

[2k1AmberR/T]

Not the same manufacturer as far as I know...I thought Todd just had the molds and had someone else making them. Regardless, they're the same damn skirts. But I know Chris' are the fiberglass ones; not sure about David's.

Todd just got the same GSM manufacturer to make more runs for him, that's all. (after all, Todd worked for GSM at one point! He had the connection) Up until the molds were destroyed and/or the guy decided there wasn't enough money in it for him to take the time to make any more. That's why the first group buy was cheaper than the rest and the retail price on the rtmods.com site.

[ME111]

Just a heads-up that I will begin to pre-make sets this weekend and will update the first thread with what's available for immediate shipment. Trying to get ahead of the eight ball now so that I have time to work on the turtles else it just won't happen.

[ME111]

Sets available for immediate shipping:

(1) GenIII Club Cab possessing flares.

(1) GenIII Reg Cab possessing flares.

See first thread for details.

[ME111]

^ ^ ^ 2 Sets now available to ship ASAP.

[Branx5.9]

^ ^ ^ 2 Sets now available to ship ASAP.

Bump for a great set of side skirts! My truck will be all finished in a couple of weeks, i'll post pics when it is done.

Test fitted them yesterday they look great!

[ME111]

Bump for a great set of side skirts! My truck will be all finished in a couple of weeks, i'll post pics when it is done.

Test fitted them yesterday they look great!

Thanks and glad you approve!! Looking forward to the pics.

[DrewzR/T]

I'll definitely be pickin up a set in the near future!!!

[ME111]

My youngins are killing me over here crying for extra Back-To-School clothes money so I'm gonna give in on the contingency that these sets I have available for immediate shipping sell for 250 shipped. That's almost %20 off the regular price. I'm also gonna crank out 2 additional sets this week which should be ready for shipping by next Friday that I'll also apply the same deal to. Basically, I'm liquidating the supplies I've already invested in to accommodate this offer.

See the 1st post in the thread for details and I'll honor this for the next 4 orders ONLY so that I'm not over-committing. If, by chance, I get more than 4 payments, they will be refunded as immediately as humanly possible with a thread update as well.

[WhiteRT]

ok you got me :)

I need to work out a different payment method with you though as I dont have enough in my paypal to cover it.

Todd

[ME111]

ok you got me :)

I need to work out a different payment method with you though as I dont have enough in my paypal to cover it.

Todd

Whatever works for you Todd. Wish I could afford to just give you a set at no cost.

[WhiteRT]

Whatever works for you Todd. Wish I could afford to just give you a set at no cost.

Hah! No problem - I understand how it goes, have to recoop investments to make it worth while.

Lets firgure out how to get you some $$$ for a set, PM me whatever works best for you.

Todd

[ME111]

Gonna start advertising these on EBAY around the 1st of November and so all sales from that moment on will be in accordance with the terms listed there. Major changes to the terms will be as follows:

1. Workmanship. If you feel that what you were sent is not up to par, just let me know within the first 30 days of receipt and I'll make it right.
This will be changed to 7 days after receipt.

2. One year free replacement of a damaged beyond use piece up to two pieces. The clock starts after the first 30 days of receipt ends. If anything, it'll be the cab pieces most likely. So if you lowride over a speedbump at 40mph or offroad through some nasty terrain..you're covered. All I ask is that you send me the damaged piece(s) first.
This will no longer be offered but for those that purchased before November 1st I will naturally still honor. Ownership is transferable but only if the original buyer officially notifies me of the transfer.

Color Option
This will no longer be available.

[uwntsumrtII]

Any killer deals, or back to original prices?

[ME111]

Any killer deals, or back to original prices?

I've got some pieces that were made of a non-white color that I can piece a couple sets from and so those I plan to discount before the end of the month. Say 250 shipped for those sets. Group buys in the future are def still an option as well. EBAY pricing will be about the same as it is now.

[zclif2601]

how are these coming along? I may be interested in a set in the next few months if I cant get my hands on a stampede kit.... You can PM me with a price.
Is a Dakota,CC,With flares

[ME111]

how are these coming along? I may be interested in a set in the next few months if I cant get my hands on a stampede kit.... You can PM me with a price.
Is a Dakota,CC,With flares

For now back up to 300 shipped but may be doing another discount buy in April.

[zclif2601]

For now back up to 300 shipped but may be doing another discount buy in April.

Well April may work better. So I can recoup some money after I drop my truck and tires. Whats the average cost for painting these?

[ME111]

Well April may work better. So I can recoup some money after I drop my truck and tires. Whats the average cost for painting these?

Not sure about pro paint shops but some have just rattle-canned them on the cheap and they turned out well.

[zclif2601]

BSM is hard to match

[Branx5.9]

BSM is hard to match

I have about $80 in having mine painted. They seem to match pretty well. My truck is BSM also

[zclif2601]

I have about $80 in having mine painted. They seem to match pretty well. My truck is BSM also

+1 rep