installing a cam?

[fastdodgert]

how hard is it to do, ive never done it, but i dont wanna have to pay someone to do it. so like i said before, how hard is it to do it

[Adobedude]

It's not too hard, I did it, but it's easy to get confused.

Prior to the cam swap I had already changed out motors, then I swaped out the heads/rockers etc, so I knew my around the engine bay a little.

I wouldn't make it my first install by any means.

[grapejuice1998]

how hard is it to do, ive never done it, but i dont wanna have to pay someone to do it. so like i said before, how hard is it to do it

I would try to get someone to help me that's done one before, because there are plenty of things to screw up.

[Mopar318]

Get a degree wheel, and find out if that cam is actually whats its supposed to be.

[99R/TMan]

i did my own cam install with the mopar rt2 cam. i work at a chrysler jeep and dodge dealer, and i must say it was pretty hard. i would ask for help for your first one. remember dignity can be gained back but a blown motor cant be.

[Adobedude]

There's a lot that can go wrong...

I took my time and checked everything twice and asked lots o questions...My biggest problem was...Everyting.

But I got r done, next time will be a piece of cake.