plugs for my new motor

[03dakrt]

Need a recomendation for a set op plugs for my new motor. Here is the run down:
403 stroker
eddy heads
11.2:1 CR
intake exhaust
lift .520 .523
duration 230 236@.050
cam is installed at 105 with a 110 degree LCA

seems like that is all you would need.

Thanks:burnout:

[Trueblue R/T]

Won't state a brand but you need to use as cold a plug as you can make work with that cr..Detonation and currently avilable gas are your enemy..

[WhiteRT]

Need a recomendation for a set op plugs for my new motor. Here is the run down:
403 stroker
eddy heads
11.2:1 CR
intake exhaust
lift .520 .523
duration 230 236@.050
cam is installed at 105 with a 110 degree LCA

seems like that is all you would need.

Thanks:burnout:

I will only run NGK V-Power BKR6E - its been 4 years and I still remember the part number from memory :)

It is a snout nose colder plug usually for blown applications but with your compression ratio I would think it should work excellent....

Todd

[Intense RT]

NGK zfr7f-11 (part # 2975), it is a projected tip though. Danno said he's used them with nitrous I think.

[blk00rt]

when I was questioning which plug to use, I just went to my local parts store and got the tech line for one of the plug companies. Called them and they recommended me a plug to use.