Exhaust Gaskets R/T heads

[Darrel00R/T]

which exhaust gaskets would you guys recommend for R/T heads and mopar headers. I have been running the same exhaust gaskets since I put the headers on in 2000.

[mtlcafan79]

Do they leak? The ones that come with them work fine if not better than anything else. Mr Gasket Ultra Seals are a good alternative. You might have to trim the center ports some.

[Darrel00R/T]

I have had the heads off a number of times since I installed the headers. The first time I got the exhaust welded together it was a little crooked . So I have been fighting either collector gaskets used 3 different types and loose header bolts. The exhaust finally was done right. Now I have a ticking and taking the cheapest path first. The collector gasket had a small leak they used one smaller bolt and the metal hole was elongated. Helped a little still have ticking if it's not the exhaust gasket. Then things get more costly. I got the gaskets since I went by Summit on the way home from the Dyno got the only ones they had in stock. Which just happened to be the ones you suggested. Thanks for replying

[KicknAsphlt]

I've heard the Bison Gaskets that come with the PPHs are just about the best you can get. Or, you could try these:
http://catalog.remflex.com/product_p/rf6004.htm

I'm having custom gaskets for the Spintechs made by these guys...we'll see how they do when I get 'em back.