PDA

View Full Version : LM-2 Install



X_HAWAII RT
11-02-2009, 04:52 AM
The LM2 is here. I skimmed throught he insructions briefly but I'm still a bit confused. I will read throught them again when I have some time. Can someone give the quick and dirty to hooking this thing up?

Thanks

BryanRT360
11-02-2009, 11:55 AM
plug it in hit record:nana:

with mine I have to power up w/ the 12v source first. than once the a/f starts to read I plug in the odb port.

hold the mode button it to bring up the menu. select configure obdII IIRC select the ISO version. it will then take you through the parameters to record. I record timing, map, rpm, tps, and iat. iat is on low priority

emwhiteR/T
11-02-2009, 01:35 PM
plug it in hit record:nana:

with mine I have to power up w/ the 12v source first. than once the a/f starts to read I plug in the odb port.

hold the mode button it to bring up the menu. select configure obdII IIRC select the ISO version. it will then take you through the parameters to record. I record timing, map, rpm, tps, and iat. iat is on low priority

x2

I set the OBDII to auto and it figures it out.

Make sure to calibrate it before you install it.