Mopar adj. 1.7 RRs on R/T heads?

[DaPurpleRT]

I used these on my Iron Ram heads, will they work on Mopar R/T heads as well? I can never remember the deal with which heads use which rockers and such....

[uwntsumrtII]

i have them on my 2.02 R/T heads. just need the Crane conversion kit.

[DaPurpleRT]

Linkie?

[Trueblue R/T]

I used them on my R/T heads..I went with ARP studs and also run 1.5" dia springs set for .700 lift..

[uwntsumrtII]

part number CRANE CAMS 36655-16 $94.95 @ Summit

[DaPurpleRT]

Hmm, looking at it, I swear it looks like my RRs already have them, but I could be totally wrong....

[99BarneyRT]

I have the NON adjustable 1.7s on my 2.02 RT heads. The 1.7s will fit just fine with the heads, its the cam lift that's an area of concern. Seen 1.6s and 1.7s on these heads, but its all related to the cam lift specs. As for as whats needed to install them, honestly I'm not sure. Mine and buddies (1.6s) installed fine, then again they are both HS's.

[uwntsumrtII]

Hmm, looking at it, I swear it looks like my RRs already have them, but I could be totally wrong....

looks like you have everthing you need. be sure to put some red loc-tite on the studs and torque them to about 25lb-ft.

[99BarneyRT]

looks like you have everthing you need. be sure to put some red loc-tite on the studs and torque them to about 25lb-ft.

I STRONGLY agree!! been there, done that, learned fromit lol

[grapejuice1998]

I used these on my Iron Ram heads, will they work on Mopar R/T heads as well? I can never remember the deal with which heads use which rockers and such....

For my own educational purposes, what's a "Ram head"?

[BryanRT360]

EQ magnums aka Iron Rams aka Hughes aka socal heads

[grapejuice1998]

EQ magnums aka Iron Rams aka Hughes aka socal heads

Oh, I never heard them called that until Ryan posted his for sale. Thanks!

[DaPurpleRT]

Yep, that's what Hughes called them and that's where they originally came from.

Thanks for the info guys.