WTB: Spintech Side Pipes

[SinCity R/T]

I recently picked up a used Spintech dual exhaust kit, but the exhaust is dumped right after the mufflers. I'm thinking this might be a bit too loud for my combo, figured I'd check and see if anyone might have bought one of these exhaust kits and chose to not use the side pipes. There was a set on E-Bay recently, but the guy cancelled/re-listed the auction and says he only has the polished side pipes, does not have the over-the-rail portion.

So... Anyone have a set of the over-the-rail pipes & side exhaust tips available?

[BlueCCRT]

Why not just have an exhaust shop make you a set.

[RTdingo7]

G'day Steve, funny you should mention this I was, I was bidding on that e-bay item until he did that. I'm interested in the over the rail pipes and tips as well, maybe we could get a better price from someone with 2 or more orders. Let me know your thoughts. Cheers Ian :burnout:

[RTdingo7]

Why not just have an exhaust shop make you a set.

Exhaust shops usually don't do mandrel bent exhausts. "?"

[SinCity R/T]

Why not just have an exhaust shop make you a set.

1) The Spintech kits are already pre-made and are known to fit our trucks
2) Mandrel-bent pipes
3) For the most part when these kits pop up they sell for under $100.
4) These pipes already pop up from time to time, a certain percentage of people who buy the pre-configured Spintech kit choose to go rear exit instead so they sell these pipes separately.

[Moparornocar00]

hey i found this on ebay.http://cgi.ebay.com/ebaymotors/Spintech-Dual-3-Polished-SS-Exhaust-Tips-Dakota-R-T_W0QQitemZ290211294481QQcmdZViewItem?hash=item290 211294481

[RTdingo7]

That's the listing that was changed, he's only selling the polished tips! :burnout:

[mtlcafan79]

http://www.mandrelbend.com/

Too bad you guys aren't closer. Those guys quoted me $650-700 for a 2.5" mandrel bent system in stainless with dual mufflers and dual cats. They only do mandrel bent work in stainless and price their work at or below the price of aluminized. When my GSM system rots out I'll be stopping by to visit them.

[RTdingo7]

Could you show them this pic and see if they could do it and how much?

[mtlcafan79]

I'm sure they could do them. They've seen my truck, but mine are hacked up a bit now and rewelded because I run different mufflers. They don't come out. I'd have to ask if they need another truck to copy them off of/fab from or if mine would be good enough. Have you asked Rick from ProZen if he can sell them seperate?

[Moparornocar00]

you could alwasy order some stainless bends from summit or jegs and then take it to a shop and get it welded up. Thats how i did my exhuast didnt cost as much

[RTdingo7]

Appreciate your comments, I give Rick a call. :biggthumpup: