plug wires

[Jontoad]

so I'm still finding little crap to fix from when the squirrels got in my engine bay and ate a bunch of wires. i mentioned that a while back on delphi if you don't remember. so the truck started to stumble today and i popped the hood. sure enough a plug wire was chewed that i didn't see before and was sparkin.

I'm looking at these Taylor thundervolt plug wires unless you guys know of a different red set to get. I'm not lookin to spend a lot as my r/t is now my work truck/daily driver since i have the SRT.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=TAY%2D84276&N=700+4294908110+4294907880+4294924666+4294925143+ 4294840106+4294756594+115&autoview=sku

[RTdingo7]

I've been running the 8.2mm Taylor Thundervolts for about 18mths now and havn't had any issues. :hail:

[emwhiteR/T]

I have been using the taylor 8.2mm's on my truck for about 8 months and have no problems with them.

[bad360rt]

Those should work. The Taylor Spiro-Pros are good too, and a lil bit cheaper.

[Jontoad]

thanks guys. ill order them tomorrow then.

[DakRat33]

I was gonna ask the same thing, LOL...glad someone else asked first and I was able to find it when I searched...

So the Taylor 8.2s? cool...what about the MSD 8.5, or the JBA's? anyone running them?

[Jontoad]

I was gonna ask the same thing, LOL...glad someone else asked first and I was able to find it when I searched...

So the Taylor 8.2s? cool...what about the MSD 8.5, or the JBA's? anyone running them?

i bought those taylors and they are working great. only one problem. the wires didn't fit the stock wire loom clips being that they are bigger wires. so your gonna need new clips for them or something.

[AmberFireDaK]

i bought those taylors and they are working great. only one problem. the wires didn't fit the stock wire loom clips being that they are bigger wires. so your gonna need new clips for them or something.

Mine fit.....barely but they fit

[Rtspeeddemon]

I was gonna ask the same thing, LOL...glad someone else asked first and I was able to find it when I searched...

So the Taylor 8.2s? cool...what about the MSD 8.5, or the JBA's? anyone running them?


I run the MSD 8.5's highly recommend them.

[Jontoad]

Mine fit.....barely but they fit

? mine weren't even close to fitting. lol.

[TurboBlew]

Ive got Taylor 10mm wires. No probs with mine going on 2yrs