PDA

View Full Version : WB Commander Hookups



ME111
06-03-2009, 08:13 PM
In the process of finalizing my wiring for the WB and gauges but have run into a predicament. I want to use the WB to log TPS or MAP, A/F and RPM but it only allows for one 0-5v signal input. If I could use a toggle switch to change from the TPS to the MAP signal when recording, which switch should I get to do this. I know I'll have to make two logs but no biggie. I'll have to get a Lighted 2 pole/Single Throw Switch from RadioShack or somewhere anyway to activate the logging still so I figured I'd kill two birdies at once. Also, any help on wiring this up would be very, very helpful. Somebody must have done this already by now.