builds done and ready for tunning

[dakotapimpc]

well my build is probably 80% done and awaiting exhaust and tunning

finished my fuel cell build with

a1000 fuel pump
krc return fuel rails
aeromotive fpr
battery relocation
20 gal fuel cell
moraso kill switch
painted the frame, firewall
and rad support

still awaiding

install on 2 bar map
exhaust w/cutouts
pie dyno tuning

here are some pics enjoy

http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/projectfuelcell003.jpg
http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/projectfuelcell005.jpg
http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/projectfuelcell010.jpg
http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/projectfuelcell013-1.jpg
http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/projectfuelcell015-1.jpg

[dakotapimpc]

some more

http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/projectfuelcell006.jpg
http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/projectfuelcell007.jpg
http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/projectfuelcell008.jpg
http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/projectfuelcell017-1.jpg
http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/projectfuelcell001.jpg
http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/projectfuelcell002.jpg

[dakotapimpc]

few more

http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/tent.jpg
http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/paint.jpg
http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/11000.jpg

[Wolf360rt]

damn man looks great.. everyone is sharing pics or their projects and it is giving me some awesome ideas on how to place things... hell yea good work...

[20SilverDaks01]

Looks Good to me! :drive:

[dakotabluert98]

truck is looking awesome!!!!!:rockwoot:

[bad360rt]

Looks great! :biggthumpup:

I'd change one thing tho, I'd ditch the crossover and feed each rail separately, don't like how it deadends at the front of the rail.

[Sick 660r]

Looks great! :biggthumpup:

I'd change one thing tho, I'd ditch the crossover and feed each rail separately, don't like how it deadends at the front of the rail.

would you have the return coming from the front then? Like come out of the front of the rail then both go under the m1 to the regulator.

On mine I think im going to try and put the crossover on the front so that the fuel is constantly flowing through both rails.

[Fltlander]

well my build is probably 80% done and awaiting exhaust and tunning








http://i192.photobucket.com/albums/z270/danny12_020/Project%20Fuel%20cell/projectfuelcell013-1.jpg


Black Chrome...Hell ya....























Ya I know it's just the great shine you have back there LOL....Truck looks good...

[mtlcafan79]

Who's doing your exhaust?

[Adobedude]

would you have the return coming from the front then? Like come out of the front of the rail then both go under the m1 to the regulator.

On mine I think im going to try and put the crossover on the front so that the fuel is constantly flowing through both rails.

I feed the front of the rails, then out the back to the regulator.

Since this pic I've mounted the Y block and fine tuned the placement of the fuel lines a little...

http://www.nmbuilder.com/motor_1.jpg

[dakotapimpc]

not sure on the exhaust joe knows a guy at a shop in crofton or me and my buddy may fab somthing up why do you have connections anywere else????

thanks for the pics dave ima do that when the rest is done i already have all the fittings i need to figure out why im not getting any ground to the front of the frame

[mtlcafan79]

Not a hook up, but these guys do some great work: http://www.mandrelbend.com They have done some basic work for me so far. Once my spintech systems rot out, they will be replacing them. They quote mandrel bent stainless systems for less than the price of a regular spintech system. They are in Pasadena on Mountain Rd.

[Adobedude]

On thing I did do was change out the short 90º bends on the fuel rails for the long sweep 90º fittings like you have on your fuel cell retun.

I've read the short 90º bends can heat up the fuel.

[Rtspeeddemon]

Looks excellent great job! :biggthumpup:

[dakotapimpc]

thanks a lot guys been working on this thing nonstop

[Intense RT]

Really nice work! I looking forward to getting mine that clean someday. I'm not the original owner, otherwise it would probably be better off. I'd say its a 10 footer at best but still cleans up well. The bed was used like a reg truck though. :( I'm glad it came with a fiberglass tonneau.

[dakotapimpc]

On thing I did do was change out the short 90º bends on the fuel rails for the long sweep 90º fittings like you have on your fuel cell retun.

I've read the short 90º bends can heat up the fuel.


they are 120 degrees on my fuel cell not 90's thats why they look so long

[dakotapimpc]

Really nice work! I looking forward to getting mine that clean someday. I'm not the original owner, otherwise it would probably be better off. I'd say its a 10 footer at best but still cleans up well. The bed was used like a reg truck though. :( I'm glad it came with a fiberglass tonneau.

my bed used to be used like a regular truck but thats why i carpeted it

[dakotapimpc]

Not a hook up, but these guys do some great work: http://www.mandrelbend.com They have done some basic work for me so far. Once my spintech systems rot out, they will be replacing them. They quote mandrel bent stainless systems for less than the price of a regular spintech system. They are in Pasadena on Mountain Rd.

thanks a lot man i will check them out :woot: