PDA

View Full Version : NO2 with a KB SC ?



timmydatoolman
03-26-2009, 12:47 AM
anyone running NO2 with the Kenne Bell SC ? I want to add a 50 shot, am planing on using the aux injector location to install the nozel, anyone else try this?

ME111
03-26-2009, 01:04 AM
anyone running NO2 with the Kenne Bell SC ? I want to add a 50 shot, am planing on using the aux injector location to install the nozel, anyone else try this?

Not yet but depending on how she reacts, def maybe. Would you happen to have a dyno sheet I can peek at por favor? I finished fabbing and installing a blockoff plate for the ports this morning and naturally gave the fab work some thought for nozels.

grapejuice1998
03-26-2009, 05:29 PM
anyone running NO2 with the Kenne Bell SC ? I want to add a 50 shot, am planing on using the aux injector location to install the nozel, anyone else try this?

That's how "Big Bird" started out.

Get ready to replace some head gaskets, or maybe build a motor.

timmydatoolman
03-26-2009, 09:01 PM
That's how "Big Bird" started out.

Get ready to replace some head gaskets, or maybe build a motor.

Do you mean the stock head gaskets or do you tinkit will blow the felpro's ?

timmydatoolman
03-26-2009, 09:04 PM
[QUOTE=ME111;52886] Would you happen to have a dyno sheet I can peek at por favor? [QUOTE]

If I can find them I will scan them 2 you, it might be awhile I realy don't file well!

grapejuice1998
03-26-2009, 09:20 PM
Do you mean the stock head gaskets or do you tinkit will blow the felpro's ?

I have seen a couple of people use nitrous with a blower and come out with some broken parts. I'd use more of one or another, before I'd mix em.


For instance; at the Truckin Nats back in about 2002, a guy ran a Vortech with a 35 shot. It blew the head gasket so bad, it scorched a trench in the block. Total junk.

mtlcafan79
03-27-2009, 01:10 AM
Do you like your Hypereutectics over easy or fried hard? lol...

ME111
03-27-2009, 01:32 AM
[QUOTE=ME111;52886] Would you happen to have a dyno sheet I can peek at por favor? [QUOTE]

If I can find them I will scan them 2 you, it might be awhile I realy don't file well!

Nice! Thanks for the effort in advance.

Five9Dak
03-27-2009, 06:04 AM
If you had the motor for it, I wouldn't use those injector locations. I would put a plate on it and machine the m1 down the same thickness. I don't trust that injector location at all for good distrubution, hence the 8 big uns.

ME111
03-27-2009, 11:50 AM
If you had the motor for it, I wouldn't use those injector locations. I would put a plate on it and machine the m1 down the same thickness. I don't trust that injector location at all for good distrubution, hence the 8 big uns.

I'm tending to agree with you now thinking about it some more. Wouldn't take much actually to mod that part of the KB kit for straight down injection as it would be about the same amount of effort to mod the block-off plate. I think if anything, I'd use it for an Alky Meth kit.

Five9Dak
03-27-2009, 06:58 PM
That's whats in the ports on mine, IAT and meth injector.

NightmareR/T
04-01-2009, 08:11 PM
Do you like your Hypereutectics over easy or fried hard? lol...

Fried Hard is the best for the Hyperucraptic pistons:rockwoot:

timmydatoolman
04-01-2009, 11:13 PM
glad I asked thanks for the input