View Full Version : Let's see your wheels
torquejunky59
01-23-2009, 07:32 PM
Looking into new wheels, and nobody sells good 6x4.5 wheels! :jester:
If you have rims OTHER than the stock 17x9 Dakota R/T wheels... POST EM UP! This means NO stock wheels.
Any size, color, finish, etc. List the name and size of the wheels/tires
Oh, and if your truck is lowered please specify amount. (i.e. 2/3 drop)
THANKS! :woot:
Twisted R/T
01-23-2009, 08:16 PM
CCW 505A's $2750 +shipping and they are all yours
dakotabluert98
01-23-2009, 10:02 PM
mine u can see in below. american racing
y2krtaf
01-23-2009, 11:04 PM
I have a pair of Colorado customs 18x10 Lazear 6's,that currently have 255/55-18 on them.They will probably wind up with some sort of sticky tire mounted on them however.
Then I have a set of CCW sp200 in a 19x10 with 275/40-19 tires.
I have a Hothckis drop.
http://i17.photobucket.com/albums/b84/gachtzehn/lazear6wheels001.jpg
http://i17.photobucket.com/albums/b84/gachtzehn/DSCF1152.jpg
TurboBlew
01-23-2009, 11:09 PM
old pic
http://img.photobucket.com/albums/v486/Frankfriendly/DAKOTAPICS/P7180517.jpg
18x9.5. w/ hotchkis drop
Pete102580
01-24-2009, 02:18 AM
self explanitory, see below.
BTLFED R/T
01-24-2009, 05:28 PM
In my sig. 22x9 and 22x10 Intro Pentia 5. 265/30/22 front tires, and 295/30 rears. Hotchkis plus 1"
Warrior Poet
01-25-2009, 12:43 AM
CCW 505A's $2750 +shipping and they are all yours
What size are those? Nice lookin set of rollers there
dakrt23
01-29-2009, 01:55 AM
What size are those? Nice lookin set of rollers there
same company as you quoted above... CCW... 19x10 with 295/35/19 KDW2 tires... hotchkis plus 1"-ish more...
http://i47.photobucket.com/albums/f154/dakrt23/Truck/P1240064-1.jpg
WeezyRT
01-29-2009, 05:13 PM
y2krtaf,
Any pics of the CCWs on the truck?
Dakrt23,
More pics!
04STAMPEDE/RC
01-29-2009, 05:23 PM
22''x9.5'' Liquid metal magmas on 3/5 DJM drop, $1300 and there yours:biggthumpup:
http://i100.photobucket.com/albums/m34/2003chevysdime/Picture076-2.jpg
y2krtaf
01-29-2009, 06:29 PM
y2krtaf,
Any pics of the CCWs on the truck?
Dakrt23,
More pics!
Sorry man I do not at the moment have any pics with them mounted on the truck.I spent a little over 4 hours on each wheel polishing them up right,then stacked them in the corner of the garage.I need to get a couple of other things done,and then I'll put them on.For now its resting on the stockers complete with the original tires.
dakrt23
01-29-2009, 08:16 PM
y2krtaf,
Any pics of the CCWs on the truck?
Dakrt23,
More pics!
you can go to the multimedia section and look up "winter time in san diego" thread... i have alot of those pics in there... thanks!!...
nike306
02-02-2009, 05:18 AM
same company as you quoted above... CCW... 19x10 with 295/35/19 KDW2 tires... hotchkis plus 1"-ish more...
http://i47.photobucket.com/albums/f154/dakrt23/Truck/P1240064-1.jpg
You say plus 1" you mean you raised the truck back to stock dak height? or lowered an extra inch?
dakrt23
02-02-2009, 05:22 PM
You say plus 1" you mean you raised the truck back to stock dak height? or lowered an extra inch?
its hotchkis coils plus 1 inch lower... i cut the coils about 3 times to get the ride height where i wanted it up front, and i put 1" blocks out back with DJM 2" hangers... hotchkis sway bars and bilstein shocks for handling too...
whitedak99
02-02-2009, 10:30 PM
http://i92.photobucket.com/albums/l38/whitedak99/100_0428.jpg
http://i92.photobucket.com/albums/l38/whitedak99/100_0329.jpg
Intro Mulholland 6's
My front rims are 20"x 8.5"
The rear rims are 20"x 10"
lowered 3/4
Five9Dak
02-05-2009, 02:40 PM
17x8 Boyd Coddington Timeless 6
245/45/17
255/55/17
These haven't been polished in about a year, they look sweet when I do them up. They don't weigh very much, espeically with the mustang tires on the front, lol. I'm looking to move the 255s back up front and get a bigger rear tire now that I have the blower.
http://i14.photobucket.com/albums/a319/black99rt/DSC_2904.jpg
http://i14.photobucket.com/albums/a319/black99rt/DSC_3584.jpg
American Racing Torq Thrusts in 17x8.
cudacrazy73
02-06-2009, 03:13 AM
22" lexani marqi II 265/35R22
tcuillier
02-06-2009, 03:45 AM
you can go to the multimedia section and look up "winter time in san diego" thread... i have alot of those pics in there... thanks!!...
Nice, very nice! Those are perfect. I absolutely HATE the look of 20s-22s-24s, and the "rubber band" sidewall look!
Tom
Warrior Poet
02-06-2009, 06:06 AM
Where can I aquire a set of the CCW's?
dakrt23
02-06-2009, 07:38 AM
Nice, very nice! Those are perfect. I absolutely HATE the look of 20s-22s-24s, and the "rubber band" sidewall look!
Tom
Thanks!!... i tend to agree with you on the rubber band look... even 20s/22/24s can look good on trucks when they have a tall sidewall tire on them, but our trucks just dont have enough wheelwell to make room for that tall of a tire (probably 30-33" tall)... i think 20 is about as big as you can go and have a tall enough sidewall to look good... 19s just seem made for these trucks so thats what im stickin with... just wish there were more tires available in 19"... love these KDW2s though...
DrewzR/T
02-06-2009, 10:17 AM
love these KDW2s though...
I agree. Ive never ran em but they sure do look badass.:biggthumpup:
WeezyRT
02-06-2009, 02:51 PM
Where can I aquire a set of the CCW's?
ccwheel.com
tcuillier
02-06-2009, 04:07 PM
Thanks!!... i tend to agree with you on the rubber band look... even 20s/22/24s can look good on trucks when they have a tall sidewall tire on them, but our trucks just dont have enough wheelwell to make room for that tall of a tire (probably 30-33" tall)... i think 20 is about as big as you can go and have a tall enough sidewall to look good... 19s just seem made for these trucks so thats what im stickin with... just wish there were more tires available in 19"... love these KDW2s though...
Yep, even 20s are marginal, unless a Dakota is dropped waaaay down. My brother-in-law manages a Les Schwab tire dealership (big chain out here in the West) in Yakima, WA. He absolutely LOVES selling the 20-24" wheel / tire combinations. It's not IF you're going to bend a rim, just WHEN! He always tries to sell the buyer wheel / tire insurance --- because they're gonna need it! He also said MOST of those he sells the big wheels to, return after about a year or so, to buy a more sensible combination. Just look on Craigslist most any day---you'll see a LOT of used 20" wheel / tire combination, for sale. Most with less than 5k iles on them.
cudacrazy73
02-07-2009, 02:50 PM
yeah.. .that was all fine and true 10+ years ago but now cars are coming factory with 20's and up. tried diffrent sized rims on my truck but it just didnt feel right having smaller rims than a neon. IMO
Warrior Poet
02-07-2009, 03:48 PM
IMO... I thin k19th are the perfect wheel for the trucks. They look good, CCW's for ex.... not sure about tires though. I say 19th's and a 2/4
yeah.. .that was all fine and true 10+ years ago but now cars are coming factory with 20's and up. tried diffrent sized rims on my truck but it just didnt feel right having smaller rims than a neon. IMO
But there is a difference from putting aftermarket 20's on a vehicle that was never deisgned for them, and buying a car with them on from the factory. For one, the cars that come from the factory with them usually have larger diameter tires so the sidewalls are taller and also have larger wheel wells to acept the larger tires. Trying to stock a 20"+ wheel and keeping withint the stock 28" diameter tire will only result in stretching a rubber bad around a piece of aluminum, and then lowering the truck to make them look even halfway decent will still force you to use rubber bands to prevent rubbing your expensive new tires.
00RedRT
02-08-2009, 06:31 AM
Intro Pentia 6's
Front: 20 x 8.5", 255/35/20
Rear: 20 x 10", 295/40/20
Suspension: Hotchkis lowered additional 1" front/rear
http://www.sidewindercustoms.com/images/audio/audio267.JPG
NICKELEYE_RT
02-08-2009, 01:50 PM
Here's a 29" tire on a 20" rim. doesn't look rubber bandy at all in my opinion.
The tire is 295/40/20 firehawk wide oval
moore_716
02-08-2009, 02:14 PM
MB Motoring Gunner 6's. 17x8 Fr. 18x8 Rr. 255-50-17's & 285-50-18's. My drop is about a 2.5 Fr & Rr/ I personally feel that 19's and or 20's are perfect for these trucks once they are lowered a min. of 2" all around.
http://i47.photobucket.com/albums/f173/moore_716/Dakota/2005_0115Image0005.jpg
cudacrazy73
02-08-2009, 06:23 PM
Intro Pentia 6's
Front: 20 x 8.5", 255/35/20
Rear: 20 x 10", 295/40/20
Suspension: Hotchkis lowered additional 1" front/rear
http://www.sidewindercustoms.com/images/audio/audio267.JPG
man nicest dakota i have ever seen hands down.
ll ViPeR II
02-09-2009, 02:02 AM
I 2nd that.
vBulletin® v3.8.7, Copyright ©2000-2012, vBulletin Solutions, Inc.