PDA

View Full Version : Viper Fan



Avo r/t
01-16-2009, 12:40 AM
Hey guys i was wondering if anyone could get me some pics of their fan install. When i bought my fan it only came wired with two 75 amp relays. Any info would be helpful.

GoFastGray
01-16-2009, 12:58 AM
If you have a fax # I can send you the wiring diagram from SoCalDakota.
Or email and i could get it to you in a couple days.

What kind of pictures do you need? I have pictures of the fan installed if that works?

Avo r/t
01-16-2009, 01:02 AM
Pics of the fan installed would be great i already have the socal instructions. I just want some other pics to go by, also does you fan have the two 75 and the two 30 amp relays wired in it?

PeteRT
01-16-2009, 01:55 AM
you cant see much in my sig, but i have the 'socal brand' 2 speed. i've got two relays, but couldnt help you with the wiring- i ended up putting mine on an on/off and high/low switch.
pete

GoFastGray
01-16-2009, 02:35 AM
Pics of the fan installed would be great i already have the socal instructions. I just want some other pics to go by, also does you fan have the two 75 and the two 30 amp relays wired in it?

Here are a couple I have on photobucket...there are more at my house on my computer i'll post up as soon as i can.

http://www.dakota-durango.com/forum/showthread.php?t=62858

Nolan
01-16-2009, 07:31 AM
Here's a schematic I made up for the SoCal fan kit.

SoCal Viper Fan Controller (http://www.hosercam.com/images/misc/SoCal%20Viper%20Fan%20Controller.PDF)

Nolan

Addicted2Blue00
01-16-2009, 08:50 AM
anyone know where ya can get just the fan now?

Addicted2Blue00
01-16-2009, 08:53 AM
http://www.y2kota.us/viperfan.html

Avo r/t
01-18-2009, 06:46 PM
Alright i have a question about the fuse tap, does it need to have two leads or one? Also this may sound dumb but what attaches to the leads?? The switch? As for the two main wires one goes into the ac relay and the other is the turn on wire. How do i tell the diff?

Nolan
02-01-2009, 08:05 PM
I've added 4 more pages to the Viper fan wiring diagram including how each circuit operates, manual switch, AC On, Hi Speed PCM control and the way I wired in a Flex-A-Lite 31149 controller. Yes, it's way overkill and fairly complicated, but I had the parts on hand (cheap!)

Here is the link to the updated wiring diagram
SoCal Viper Fan Controller (http://www.hosercam.com/images/misc/SoCal%20Viper%20Fan%20Controller.PDF)

Nolan

Avo r/t
05-17-2009, 04:14 AM
Alright guys i finally installed my fan. Now i have other questions. The brackets uses to mount the fan, does anyone have them in a pdf? traced on a piece of paper? O and does anyone know the different mounting points in the 99' and below daks vs. the 00 and up ones?

PeteRT
05-17-2009, 05:53 AM
wtf? pdf for brackets?... go to home depot, get some steel, drill some holes.... done.

pete

GoFastGray
05-17-2009, 06:31 AM
Alright guys i finally installed my fan. Now i have other questions. The brackets uses to mount the fan, does anyone have them in a pdf? traced on a piece of paper? O and does anyone know the different mounting points in the 99' and below daks vs. the 00 and up ones?

I have the same brackets a my work that Sam from SoCalDakota used. Mines a 01, so not sure if they mount the same? They just need to be trimmed and a couple holes drilled

gt77ice
05-26-2009, 03:06 PM
Nolan or others, I'm putting together a similar installation to what Nolan has in his schematics but an curious as to where did you mount the relays and temp. controller?