PDA

View Full Version : ODBII Data Logging



mtlcafan79
02-13-2008, 06:41 PM
Check this out:

http://www.innovatemotorsports.com/resources/OpenTune.pdf

The OT-1 allows you to read up to 16 channels of OBD-II (On Board Diagnostic) information directly from your vehicle's engine control unit (ECU) and integrate it into an Innovate MTS (Modular Tuning System) Log Chain. An MTS Log Chain can be logged (recorded) and analyzed on a personal computer using Innovate's award winning LogWorks software (included).

http://www.innovatemotorsports.com/resources/images/retail_label_300x300.jpg

Logs up to 16 channels at a time at 12 samples per second. $149.


LM-2

http://www.innovatemotorsports.com/resources/LM-2_MRD_6.pdf

http://www.innovatemotorsports.com/resources/images/LM2trans.gif

LM-2 Air/Fuel Ratio Meter
With OBD-II, RPM, SD, and Analog I/O
Description:
• Innovate “Direct Digital” Wideband Measurement Circuit
• Single or Dual Channel Version Available
• OBD-II Scan tool- read and clear trouble codes, and log OBD-II channels
• Log directly to SD card
• Playback log data on screen or with powerful analysis software LogWorks 3.0
• High-contrast graphics LCD
• Built-in RPM converter (inductive clamp or direct frequency)
• 4 fully-differential analog inputs
• 2 configurable analog outputs
• Positive lock connectors for all connections
• Innovate MTS serial in and out
• USB connection
MSRP:
• $479 LM-2 (Single Channel Wideband)
• $669 LM-2 (Dual Channel Wideband)

grapejuice1998
02-13-2008, 07:51 PM
So if I got that to tune with, I would still need to add the LM1 for wide band, right?

mtlcafan79
02-14-2008, 02:19 AM
If I read it correctly, the LM-2 will log both AFR AND your OBDII channels. It would be a does all for logging. Once it comes out I'm sure there will be more info. The Open Tune is very tempting as I already have AFR logging ability in both trucks.

grapejuice1998
02-15-2008, 11:01 PM
If I read it correctly, the LM-2 will log both AFR AND your OBDII channels. It would be a does all for logging. Once it comes out I'm sure there will be more info. The Open Tune is very tempting as I already have AFR logging ability in both trucks.

Wouldn't I need a wide band for a proper 02 reading though?

03dakrt
02-16-2008, 02:12 AM
I thought this was really cool. http://www.gtechpro.com/egs.html

Expensive though to have wideband and OBD2 logging.

mtlcafan79
02-16-2008, 02:27 AM
The LM-2 is a wideband. It records wideband data and OBDII data all to the same file. You can log two wideband O2's if you purchase the dual wideband version. That would let you monitor both banks if you wanted to.

timmydatoolman
02-16-2008, 03:51 AM
WOW that OBD II interface, could save me some time and money just got my LMA-3, would return it, if this will replace it. does anyone know how the OBD II will read the boost from a 3 bar map, would I be able to log it with this piece?

timmydatoolman
02-20-2008, 04:39 PM
Ordered the OT-1 yesterday, I will let you know how it works.

krusty_R/T
02-20-2008, 05:20 PM
Ordered the OT-1 yesterday, I will let you know how it works.
Cool! I'm curious...

PacManRT
02-20-2008, 06:31 PM
It doesn't say anywhere in that link i fit has an external input. I already have an AEM wideband that has both 2 and 5 volt serial outputs, I wonder if I could link them together for a streamline data stream? Does anyone know yet?

--Justin

timmydatoolman
02-20-2008, 06:56 PM
It will work with the innovate products, but I dont know about the AEM, it dosent show it as having anything other then the innovate serial jack.

mtlcafan79
02-20-2008, 06:59 PM
It looks like the opentune only does OBDII data. The LM-2 has aux inputs. You could chain the opentune box with an SSI-4 box and log 4 channels of any 0-5V signals. An LM-3 box has a built in 3 bar map for logging purposes. "The 5 internal sensors are: 3-Bar MAP/Boost, RPM, Injector Duty Cycle, EGT/CHT, and 2-Axis Accelerometer."

99dakRT
04-04-2008, 05:58 PM
Any news on the OT-1?? How's it working out for you?? I'm getting ready to purchase a datalogger I was looking into this one:drive:

timmydatoolman
04-05-2008, 09:55 AM
Nothing new to report right now, had too much snow to get the truck out. I have it set up and with some luck will get to try it this week end