PDA

View Full Version : I need help ID'ing parts



bwjusmc
12-30-2016, 10:53 PM
Probably stupid to ask but... 1394513946 13947 Not a great pics, if I need more I can add them

DreadPirateBanjo
12-31-2016, 12:06 AM
1. looks to be m1, need pic of intake to be positive.
2. no idea
3. possible aftermarket/bored out. Fastman?

I'm just going by the "wag" method on this. Anybody else got anything?

Adobedude
12-31-2016, 12:10 AM
Shitty pictures get shitty answers.

What are the numbers on the injectors?

DreadPirateBanjo
12-31-2016, 12:13 AM
shitty answers.



I'm sorry I did the best I could.....need to add more alcohol to brain matter.........:rockwoot:

bwjusmc
12-31-2016, 12:21 AM
The # on the injector is A008A06127. Good answers for shitty pics IMO! I will try to get some better ones just trying to get a starting place. I guess on the intake I was more asking, if it says Zeus does that make it an M1? The throttle body looks a lot like the 2x52x55 from http://www.fbthrottlebodies.com/products.htm. Thanks guys.

DreadPirateBanjo
12-31-2016, 12:40 AM
Does it look like this?

bwjusmc
12-31-2016, 12:46 AM
yes, #s are different and it doesn't say Mopar, but it is otherwise very similar as far as I can tell.

99WhiteD
12-31-2016, 01:36 AM
What # is on yours? And boomer sooner!!

bwjusmc
12-31-2016, 01:53 AM
What # is on yours? And boomer sooner!!

the 4 digit close to the Zeus label is 2648 but, I can't see all of the other one, it ends with 7852. "And boomer sooner!!"

mopar5.9
12-31-2016, 02:06 AM
the 4 digit close to the Zeus label is 2648 but, I can't see all of the other one, it ends with 7852. "And boomer sooner!!"

If it ends with 7852 this should be the #number P5007852 no egr

DreadPirateBanjo
12-31-2016, 02:12 AM
If it ends with 7852 this should be the #number P5007852 no egr

Yeap you beat me to it. And oh yeah..... Roll Tide

bwjusmc
12-31-2016, 03:29 AM
Please forgive me, I know I am ignorant here. So, its not an M1, its an MPI? Or is it both, like its a Dodge and a Dakota? One down. Now just 2 more easy ones, the injectors and throttle body, then I will start working on what heads and cam I've got(not even sure where to start on those). Then on to a tune, FRP I'm on my way. You guys are F'ing great. Thanks

Adobedude
12-31-2016, 03:42 AM
It's an M1 two barrel manifold, worth its weight in gold.

Adobedude
12-31-2016, 03:46 AM
Need to get solid info on cam, heads and TB before worrying about injectors and tune.

mopar5.9
12-31-2016, 03:49 AM
Yeap you beat me to it. And oh yeah..... Roll Tide

I did a quick search for it . I have the same intake as you with the same numbers

99dart
12-31-2016, 01:41 PM
Here's a helpful injector site I found a few years ago. Are there any numbers on the back side? I don't see the number you posted on any of the injectors. Most of ours start with 0280150....
http://www.dakotart.com/forum/showthread.php?31224-Fuel-Injector-identification-Flow-Specs

99dart
12-31-2016, 01:45 PM
The # on the injector is A008A06127. Good answers for shitty pics IMO! I will try to get some better ones just trying to get a starting place. I guess on the intake I was more asking, if it says Zeus does that make it an M1? The throttle body looks a lot like the 2x52x55 from http://www.fbthrottlebodies.com/products.htm. Thanks guys.

I would say you are correct on the TB.

bwjusmc
12-31-2016, 06:29 PM
Definitely R/T heads. Found it on the driver side front. That doesn't tell me if anything has been done to them but, at least it's a positive ID. I have no idea where to start on the cam. Any thoughts?

bwjusmc
12-31-2016, 07:13 PM
Here's a helpful injector site I found a few years ago. Are there any numbers on the back side? I don't see the number you posted on any of the injectors. Most of ours start with 0280150....
http://www.dakotart.com/forum/showthread.php?31224-Fuel-Injector-identification-Flow-Specs

Found some # under the clip. I don't know if there are more under the rail but what I can see looks like 07961* edit-SIEMENS DEKA Fuel Injector 107961 630cc 60lb EV1 Long 14 Ohms

99dart
12-31-2016, 10:47 PM
Holy Doodles!! 60 pounders! It is an na engine, right?

Adobedude
12-31-2016, 11:12 PM
Holy Doodles!! 60 pounders! It is an na engine, right?

19 lb....60lb...Whatever it takes.

bwjusmc
12-31-2016, 11:20 PM
Holy Doodles!! 60 pounders! It is an na engine, right?

Vortech2 supercharger, so far I get up to around 8lbs of boost.

Adobedude
01-01-2017, 12:21 AM
As the details trickle in.....

99dart
01-02-2017, 12:35 AM
As the details trickle in.....

:jester:

bwjusmc
01-05-2017, 08:21 PM
I would say you are correct on the TB.

confirmation on the throttle body,

bruce
12:20 PM (2 hours ago)

to me
Thats a 980cfm 55x53 !

Bruce K Bridges
F&B Performance Engineered Products
766 Ocean Crest Rd
Cardiff by the Sea CA 92007
www.fbthrottlebodies.com
858 324 1770 PST

bwjusmc
01-05-2017, 08:32 PM
Need to get solid info on cam, heads and TB before worrying about injectors and tune.

I wish I could find the builder for that info. Anyone know of someone from Tulsa, OK that was building these things maybe 4 to 6 years ago?