PDA

View Full Version : Carb question?



Criderpc86
06-20-2015, 07:49 PM
I am asking this question cause a friend asked me and im not a carb guy...for a 360 which is better a holley 750 or a edelbrock?

G-Man
06-21-2015, 01:42 AM
I like the Holley Carb's better.

niebs
06-21-2015, 01:50 AM
750 is big if its stock. and most ppl like one or the other. really depends on the person working on it. edelbrock is more "beginner" friendly. i say that lightly tho or course. theres alot of tweaking you can do with holleys to get everything out of them tho.

Hugh Jassole
06-21-2015, 03:02 AM
edelbrocks are basically an improved knock off of what came stock on that motor. I prefer the holley.

Criderpc86
06-21-2015, 04:48 AM
really good input guys, Ill let him know, thank you so much

Adobedude
06-21-2015, 06:28 AM
Holley from Pro Systems. Bolt it on and go.

Danno
06-22-2015, 03:01 PM
Depends on the size cam in the motor.

For anything under 280 advertised duration, the Edelbrock will give better overall driveability. If you have a low idle vacuum cam, then your only choice is Holley.

750 is just fine for a stock 360, so don't worry about "over sizing" it. The Thermoquads that came on many of the 360's were over 850 CFM from the factory, and the factory 6 pak setup on the 340's was over 1100 cfm.....